CARB P2 / TSCA VI certifiedISO 9001:2015E0 tested every 3 monthsEUDR geodataPPWR testedCertificates and test resultscontact@minhthanhplywood.comWhatsApp +84 988 586 601

Specifications

Plywood 2500 x 1250 mm: who uses the European sheet, how it compares with 1220 x 2440, and how to order it

Updated
Request a Quote

Plywood 2500 x 1250 is the European metric sheet: 1250 mm wide and 2500 mm long, 3.125 m² per face, about 5 % more area than the 1220 x 2440 mm sheet. Furniture plants, formwork users and builders' merchants across continental Europe buy it because it fits the 625 mm module their systems are planned on. For us it is a standard press size. This guide compares the two sheets, gives weights by thickness and core, and shows how to order it by the container. Minh Thanh Plywood is a furniture plywood manufacturer in Phu Tho, Vietnam, with Europe as its main market.

Listen to the summary · 0:47
Listen to the article · 2:33
Cover of “Plywood 2500 x 1250: Sizes, Weights and Uses”: 3.125 m² per sheet; 5 % more than 1220 × 2440; 28.1 kg 18 mm Styrax; 15–45 days after deposit
Plywood 1250 × 2500: area, weight, plan · 2:33

What is plywood 2500 x 1250?

Plywood 2500 x 1250 is a plywood sheet 2500 mm long and 1250 mm wide, the main metric sheet size in continental Europe. Its face area is 3.125 m², about 5 % more than the 1220 x 2440 mm sheet sold worldwide as 4 x 8 ft.

The size comes from the European planning module of 625 mm: 1250 mm is two modules and 2500 mm is four. Kitchen and furniture systems, partition walls and many formwork panels are drawn on that grid, so a 1250 x 2500 mm sheet divides into standard parts with little waste.

The two numbers are written either way round. Merchants list “2500 x 1250”, mills and cutting software often write “1250 x 2500” with the width first; both describe the same sheet.

Is 1250 x 2500 plywood a standard size?

Yes. In continental Europe, 1250 x 2500 mm is a standard plywood sheet stocked by merchants beside 1220 x 2440 mm, and at Minh Thanh Plywood it is one of our two standard press sizes. We make it in the same faces, cores, glues and thicknesses as our 1220 x 2440 mm panels, so it is not priced or scheduled as a custom size.

Our sheet sizes Status
1220 x 2440 mm Standard
1250 x 2500 mm Standard
1220 x 2500 mm Custom size
1220 x 2280 mm Custom size
Cut-to-size parts One panel cut into 4, 6 or 8 pieces

Real merchant listings show how widely the sheet is used: birch plywood 15 mm B/BB 2500 x 1250 mm in Latvia, birch with white melamine 2500 x 1250 mm in Ireland, and 18 mm construction formwork plywood 2500 x 1250 mm in Bulgaria. Swedish DIY chains stock the same size beside their construction formats.

Plywood 1250x2500 versus 1220x2440: what is the difference?

Plywood 1250x2500 is 30 mm wider and 60 mm longer than the 1220x2440 sheet, with about 5 % more face area and about 5 % more weight at the same thickness. Everything else, the build, the faces and the glue, can be identical.

Point 1220 x 2440 mm 1250 x 2500 mm
Face area 2.977 m² 3.125 m²
Area difference Baseline About 5 % more
Origin 4 x 8 ft imperial sheet 625 mm European module
Main markets Worldwide, UK, North America, Asia, Africa, Gulf Continental Europe
Weight at 18 mm, Styrax core 26.8 kg 28.1 kg
Sheets per m³ at 18 mm about 18.7 about 17.8
Price basis Per m³ Per m³; about 5 % more per sheet

Choose 1250 x 2500 mm when your cutting plans, panel saws or CNC nesting programs use the metric module. Choose 1220 x 2440 mm when your parts list was drawn for the 4 x 8 ft sheet. Changing size without changing the cutting plan wastes the extra 5 %.

Plywood 2500 x 1250 compared with 1220 x 2440 on area, weight, module and main markets

Who uses 1250 x 2500 plywood?

1250 x 2500 plywood is used mainly by European furniture plants, cabinet and shopfitting workshops, formwork users and builders’ merchants. All of them work on metric parts lists.

Buyer What they use it for Typical specification
Furniture and kitchen plants Carcases, fronts, shelves on CNC nesting lines 15–18 mm, birch or poplar face, sanded, E0
Shopfitters and interior contractors Wall panels, counters, displays 12–18 mm, decorative or UV-ready faces
Formwork users Slab and wall forms on metric systems 18 mm film-faced
Vehicle and trailer builders Floors and linings 12–21 mm, durable bond
Builders’ merchants and DIY chains Stock sheets for trade and retail 9–18 mm, several faces
Packing and crate makers Crates sized on the module 9–15 mm packing plywood

Our main market is Europe, with regular shipments to European buyers and repeat orders into Italy, where furniture plants order both 1220 x 2440 and 1250 x 2500 mm sheets and cut-to-size panels.

1250 x 2500 plywood applications include 15–18 mm furniture, 18 mm formwork and 9–15 mm packing panels.

What thicknesses and builds are available in 1250 x 2500?

We make 1250 x 2500 mm plywood in every thickness from 3 to 40 mm, with the same faces and cores as our 1220 x 2440 mm range. Our 15 and 18 mm furniture panels are the most ordered thicknesses in this size.

Specification Options in 1250 x 2500 mm
Thickness 3–40 mm; thin 3–5 mm panels always 5-ply
Faces Birch, poplar, EV (engineered veneer), okoume, pine, eucalyptus; bintangor, gurjan, sapele and others on request
Face grades Birch D+/D or D/E (D+ is close to B, D to BB); poplar and eucalyptus A/A, A/B, B/B
Core White Styrax or Eucalyptus; Acacia and Pine on order
Glue and emission UF glue at E0 emission for furniture; MR/melamine-fortified or phenolic (WBP) to order
Build Core stitched both horizontally and vertically; pressed twice for furniture grade
Tolerance Thickness down to ±0.2 mm sanded (±0.2–0.3 mm); length and width ±2 mm
Surface Sanded and polished; both faces UV-ready

Film-faced plywood for formwork and packing plywood for crates are also made in this size, with their own tolerances of ±0.5 mm for film-faced and ±0.5–1.0 mm for packing grades.

1250 x 2500 plywood bond selection: UF E0 for dry furniture, MR for humid use and phenolic WBP for outdoor applications.

How much does a 1250 x 2500 plywood sheet weigh?

A 1250 x 2500 x 18 mm plywood sheet weighs about 28.1 kg on a Styrax core, 32.6 kg on Acacia and 36.6 kg on Eucalyptus. Weight is the sheet volume, 3.125 m² times the thickness, multiplied by the core density.

Thickness Volume per sheet Styrax core, 500 kg/m³ Acacia core, 580 kg/m³ Eucalyptus core, 650 kg/m³
9 mm 0.0281 m³ 14.1 kg 16.3 kg 18.3 kg
12 mm 0.0375 m³ 18.8 kg 21.8 kg 24.4 kg
15 mm 0.0469 m³ 23.4 kg 27.2 kg 30.5 kg
18 mm 0.0563 m³ 28.1 kg 32.6 kg 36.6 kg
21 mm 0.0656 m³ 32.8 kg 38.1 kg 42.7 kg
25 mm 0.0781 m³ 39.1 kg 45.3 kg 50.8 kg

Reference planning densities; the face veneer and glue change the final weight slightly. Our plywood weight calculator works out other sizes.

A Styrax-cored sheet is the lightest choice for furniture plants that handle full sheets by hand or on vacuum lifters; Eucalyptus suits buyers who want a denser, harder core for screws and hinges.

Plywood 1250x2500 weight per sheet by thickness and core species

Does 1250 x 2500 plywood cost more than 1220 x 2440?

Per cubic metre, 1250 x 2500 plywood costs the same as 1220 x 2440 mm of the same build; per sheet it costs about 5 % more because it holds about 5 % more wood. Plywood is quoted per m³, so the size changes the sheet count, not the rate.

Indicative starting prices in October 2026 are from US$350/m³ for furniture and interior plywood and from US$250/m³ for commercial plywood; the final price follows the face, core, glue, thickness, size, quantity and delivery term.

The real cost question is yield. A sheet that matches the parts list wastes less, and that saving is usually larger than the 5 % difference in sheet price:

Part From 1220 x 2440 mm From 1250 x 2500 mm
625 x 1250 mm module panel 1 4
600 x 2400 mm cabinet side 2 2
1250 x 1250 mm square 0 2
610 x 1220 mm half panel 4 4

Whole parts per sheet before saw kerf and edge trim.

How is 1250 x 2500 plywood packed and loaded?

1250 x 2500 plywood is packed like our 1220 x 2440 mm sheets: packs about one metre high on full timber bases, with sheets per pack set by thickness and then capped by weight. The pack plan for a 40HC is drawn for the larger sheet on each order.

Packing point 1250 x 2500 mm sheets
Pack height About one metre
Sheets per pack at 18 mm 55
Pack weight at 18 mm, Styrax about 1,547 kg plus base and wrap
Protection Edge protection under straps, wrapped on all sides
Records Photos and film of every shipment before loading
Payload planning 28,000 kg unless the booking is lower

Each 18 mm sheet in this size weighs about 5 % more than a 1220 x 2440 mm sheet, so a container of heavy Eucalyptus-cored panels reaches the weight limit before it runs out of space. Our packing calculator and container loading page show how packs are planned. MOQ is one 40HC, and mixed specifications are loaded by agreement, usually one or two per container.

Is 1250 x 2500 plywood suitable for Europe?

Yes. 1250 x 2500 mm is the European sheet, and our panels meet the emission and quality requirements European and US furniture buyers ask for; CARB P2 / TSCA Title VI certification is the accepted proof. The sheet size itself has no compliance rule: what matters is the panel’s emission, documents and, for construction use, its declared performance.

European requirement What we supply
Formaldehyde emission The EU limit is 0.062 mg/m³ under REACH Annex XVII entry 77 (Regulation (EU) 2023/1464), from 6 August 2026. We supply UF glue at E0 emission and CARB P2 / TSCA Title VI certification (US limit 0.05 ppm under 40 CFR 770.10), ICTT mill no. 23024, which European buyers accept; SGS testing to EN 717-1 on request
Chamber test results Six ASTM D6007 tests, April 2025 to June 2026, on 9, 15 and 18 mm panels averaged 0.014–0.032 ppm against the 0.05 ppm limit
Buyer’s own method Third-party testing to the buyer’s method, for example EN 717-1, arranged through SGS on request
Deforestation regulation EUDR compliance dossier (origin records and geolocation files) with orders, under Regulation (EU) 2023/1115
Packaging PPWR test by SGS, September 2026: lead, cadmium, mercury and hexavalent chromium not detected in all four packaging materials
Quality system ISO 9001:2015 for plywood manufacturing
Certification on request FSC* and CE*

*Supplied directly or through qualified partner mills.

Shipments to Europe sail from Hai Phong; typical days at sea are 25–35 to the Mediterranean and 30–40 to Northern Europe, by carrier and route. Documents per shipment include the commercial invoice, packing list, B/L, certificate of origin (EUR.1 for the EU), phytosanitary and fumigation certificates, and insurance with CIF.

Plywood itself is processed wood and is not subject to ISPM 15, the international standard for wood packaging, so a fumigation certificate is a question for pallets and crates, not for the panels.

Can 1250 x 2500 plywood be cut to size?

Yes. We cut one 1250 x 2500 mm panel into 4, 6 or 8 pieces for cut-to-size orders, and cut-to-size panels ship regularly to Italy and other European markets. Cutting at the mill saves the buyer saw time, transport of offcuts and storage space.

Cut Pieces per sheet Nominal piece size before kerf
In 4 4 625 x 1250 mm
In 6 6 about 625 x 833 mm
In 8 8 625 x 625 mm

Exact part sizes and tolerances go on the order, and the cut is planned so that the saw kerf comes out of the trim. Our cut-to-size plywood page shows the cutting options.

Buying 1250 x 2500 plywood in Australia

Australian merchants stock 1250 x 2500 mm as a niche sheet beside the 2400 x 1200 mm standard, so an importer buys it for metric CNC plans, European fit-outs and trade packs. Ply Online lists a 12 mm birch heavy-duty C/C sheet in this size at AUD $145 (about 27 kg), and a 2465 x 1250 mm birch sheet beside it. Other lengths such as 2465 mm are quoted from us as custom sizes.

Sheet, 1250 x 2500 mm Volume Raw FOB Hai Phong at US$350/m³ Raw FOB at US$250/m³ commercial
12 mm 0.0375 m³ about US$13 about US$9
18 mm 0.0563 m³ about US$20 about US$14

Raw FOB examples: volume times the starting rate, before the face, core, glue and quantity set the final price. They are not sheet prices.

For the shelf price you will compete with, Ply Online asks AUD $145 for the 12 mm sheet. Geelong and Ballarat Timber Supplies list 18 mm birch plywood 2400 x 1200 mm at AUD $249.99, and Adelaide Timber Solutions at AUD $299.99. Our container price is per m³ in US dollars, so the gap between the FOB figure and these shelf prices is where the importer’s freight, duty, GST, handling and margin sit.

Australian rule What it means for the buyer
Interior plywood standard AS/NZS 2270 plywood for interior use, with C or D bond; C bond for humid rooms such as bathrooms
Structural plywood standard AS/NZS 2269.0, Type A bond, for structural use
Formaldehyde classes E0 at 0.5 mg/L or less and E1 at 1.0 mg/L or less when tested to AS/NZS 2098.11; Super E0 at 0.3 mg/L or less
Customs duty General rate of 5 % on many 4412 lines (tropical-faced, birch, poplar and eucalyptus-faced plywood); Vietnam-origin goods can claim the AANZFTA preferential rate with a certificate of origin
Sea transit Hai Phong to Sydney or Melbourne: 16–18 days direct, 22–28 days with transhipment

Our furniture panels are made at E0 emission and tested to ASTM D6007 at 0.014–0.032 ppm, and the E0 class is the one Australian specifiers ask for in joinery. If your job needs a structural mark to AS/NZS 2269.0, say so on the enquiry before we quote, so the build is checked first. Send the line, the port (Sydney, Melbourne, Brisbane or Fremantle) and the sheet count, and we will quote FOB or CIF with the pack plan.

How to order 1250 x 2500 plywood from Vietnam

Order 1250 x 2500 plywood with the size, thickness, faces, core, glue, tolerance, packing and port on one line, and ask for the pack plan with the quotation. A complete line lets us quote the sheet count, the weight and the sailing together.

  1. Size: 1250 x 2500 mm, with length and width tolerance ±2 mm.
  2. Thickness and tolerance: for example 18 mm, ±0.2 mm sanded.
  3. Faces and grades: for example birch D+/D or poplar A/B, matched to an approved sample.
  4. Core: Styrax or Eucalyptus; Acacia or Pine on order.
  5. Glue and emission: UF glue at E0 emission for furniture.
  6. Moisture: 8–12 % at dispatch.
  7. Packing and destination: packs on full bases, port of discharge, FOB Hai Phong, CFR or CIF.

A ready line reads: Furniture plywood, 1250 x 2500 x 18 mm, ±0.2 mm, birch face/back D+/D, Styrax core stitched, pressed twice, UF glue at E0 emission, faces sanded and UV-ready, CIF Genoa. Terms are 30% deposit and 70% against the scanned B/L, or an irrevocable L/C at sight, with production 15–45 days after the deposit. Send your line through our cut-to-size plywood page and we will reply within hours with a quotation and free samples. Our plywood sheet sizes guide compares the other formats.

Seven ordering checks for 1250 x 2500 plywood, including ±2 mm dimensions, thickness, core, bond and 8–12% moisture.

Buyer questions, answered

What is 1250 x 2500 plywood?

It is a plywood sheet 1250 mm wide and 2500 mm long, with a face area of 3.125 m². It is the main metric plywood sheet in continental Europe, built on the 625 mm planning module.

Is 1250 x 2500 plywood a standard size?

Yes, in continental Europe it is the standard metric sheet beside 1220 x 2440 mm. At Minh Thanh Plywood it is one of our two standard press sizes, made in every face, core and thickness we offer.

What is 1250 x 2500 plywood used for?

European furniture and cabinet production, shopfitting, formwork, vehicle and trailer floors, and builders' merchant stock. Buyers choose it when their cutting plans and machines are set up for the metric module.

How much does a 1250 x 2500 x 18 mm plywood sheet weigh?

About 28.1 kg on a Styrax core, 32.6 kg on Acacia and 36.6 kg on Eucalyptus, using reference densities of 500, 580 and 650 kg/m³.

Can I import 1250 x 2500 plywood from Vietnam to Europe?

Yes. We press 1250 x 2500 mm sheets as standard and ship them regularly to European buyers, with repeat orders into Italy, CARB P2 / TSCA Title VI certification and the EUDR compliance dossier.

What is the difference between 1220 x 2440 and 1250 x 2500 plywood?

The 1250 x 2500 mm sheet is 30 mm wider and 60 mm longer, with 3.125 m² of face against 2.977 m², about 5 % more. It suits metric cutting plans; 1220 x 2440 mm suits plans built on the 4 x 8 ft sheet.

Is 1250 x 2500 the same as 5 x 5 plywood?

No. A 5 x 5 ft birch sheet is 1525 x 1525 mm, a square. The 1250 x 2500 mm sheet is a rectangle on the European metric module.

What is the MOQ for 1250 x 2500 plywood?

One 40HC container, with mixed specifications by agreement, usually one or two per container. Production is 15–45 days after the 30% deposit.

Work with Minh Thanh Plywood

Ready to put the specification into an order?

Send your application, destination and requirements.

Request a Quote

Contact us

Get a quote