D+
Pale, even birch with very few small sound pin knots and slight natural colour change; no open defects. Close to European B/BB.
Application brief
Clear-lacquered doors, visible furniture fronts, shop fittings seen up close.
Birch faced plywood · Ha Hoa, Phu Tho, Vietnam
Birch Plywood from Vietnam: Birch-Faced Panels for Furniture
In short
Birch plywood from Vietnam is a birch-faced panel: imported birch veneer on the face and back, pressed over a Vietnamese plantation core. Minh Thanh Plywood makes it on white Styrax or Eucalyptus cores, stitched both ways, sanded and polished to ±0.2 mm, with UF glue at E0 emission as standard. Thickness runs 3–40 mm on 1220 × 2440 or 1250 × 2500 mm sheets.
- Face and back
- Imported birch veneer, sanded and polished
- Core
- White Styrax or Eucalyptus, stitched both ways
- Thickness
- 3–40 mm, tolerance down to ±0.2 mm
- Emission
- E0 standard; chamber tests 0.014–0.032 ppm
- Order
- MOQ 1×40HC, 15–45 days after deposit
We build these panels on our own lines in Ha Hoa, Phu Tho, with 50,000+ m³ of annual capacity and over 20 years of plywood making behind them. We export to buyers in Europe, the Americas, Asia and Africa, and our birch-faced panels go into cabinets, wardrobes, drawer parts and shop interiors where a pale, even face matters.
Watch first
Birch plywood from Vietnam in four minutes
This film walks through the whole page: what a birch-faced panel is, how it differs from Baltic full-birch, which core to choose, what the emission tests show, how sheets are checked and loaded, and how to order. It runs about four minutes with captions.
Real sheets
Real birch-faced sheets from our production
These are photos of full production sheets in our warehouse, the same kind of proof we send before a container is loaded. They show the whole face, the figure of the birch veneer and the layered pack edge.
Ask for the same footage on your order: a sheet from each thickness flipped on camera, the edge in close view, and a caliper reading on the stack. We record it at final inspection and send it by email or WhatsApp before the container is closed.
Specification
Birch plywood specification table
Our birch plywood is a birch face and back over a stitched Styrax or Eucalyptus core, 3–40 mm thick, with UF glue at E0 emission as standard and a sanded, polished surface held to ±0.2 mm. Every line below can be changed on your order; each one is a field on the quotation.
| Face veneer | Imported birch, rotary cut; face grades D+, D or E, matched to your approved sample |
|---|---|
| Back veneer | Birch, same grade as the face or one grade lower for hidden backs (D+/D, D/E) |
| Face veneer thickness | 0.2–0.5 mm before pressing; 0.3 mm is the usual European furniture choice |
| Core | White Styrax or Eucalyptus plantation timber, grade A core veneers |
| Core joining | Stitched horizontally and vertically; outer plies stitched as standard, all plies on request |
| Plies | 3–6 mm: always 5 plies; 18 mm: 11–13 plies, most often 11; other thicknesses stated on the proforma |
| Panel density | Styrax core about 500 kg/m³; Eucalyptus core 650–750 kg/m³ |
| Glue | UF glue at E0 emission as standard for furniture and interior panels; E1, MR/melamine-fortified and phenolic (WBP) made to your specification |
| Emission | E0, chamber-tested to ASTM D6007 every 3 months, below the CARB Phase 2 limit; meets the requirements European and US furniture buyers ask for |
| Thickness | 3–40 mm |
| Thickness tolerance | Down to ±0.2 mm on sanded furniture panels |
| Length and width tolerance | ±2 mm |
| Sheet sizes | 1220 × 2440 mm and 1250 × 2500 mm; custom 1220 × 2500 mm, 1220 × 2280 mm |
| Cut to size | One panel cut into 4, 6 or 8 pieces |
| Surface | Both faces sanded and polished, UV-ready for your own UV coating |
| Moisture | Veneers dried before lay-up; moisture reading taken at final inspection on request |
| Certificates | CARB P2 / TSCA Title VI (ICTT mill no. 23024), ISO 9001:2015, TCVN 11902:2017; FSC and CE available* |
Finishing is where birch earns its price. The face sands smooth and takes clear lacquer, stain, paint, HPL or melamine paper without the colour of the wood showing through. Both faces leave our line UV-ready, so a furniture plant can run its own UV coating line straight from the pack.
*Supplied directly or through qualified partner mills.
Related: Cut to size.
Face grades
Birch face grades D+, D and E and their European equivalents
Vietnamese mills grade birch faces D+, D and E, from the cleanest face down, by the knots, patches and colour change the veneer carries. Face and back are quoted as a pair, such as D+/D or D/E. The ladder matches the European birch grades: D+ is close to B/BB, D to BB/CP and E to CP/C.
D
Sound knots and a limited number of neat patches matched to the grain; mild colour variation. Close to European BB/CP.
Application brief
Cabinet sides, wardrobes, shelving, faces under clear or tinted finish.
E
More patches and visible colour streaks, surface sound and sanded. Close to European CP/C.
Application brief
Painted parts, foil or HPL lamination, backs, drawer bottoms and internal parts.
Order the way European furniture buyers do: name the face and back pair, for example D+/D for clear-lacquered fronts, and approve a sample. The grade is fixed against a sample sheet you approve, and every production sheet is graded against that sheet, face and back separately.
Choose the lowest grade that still meets the visible finish. A clear-lacquered cabinet door takes a D+ face; a carcass side or shelf under a clear finish takes D; painted, foiled or laminated parts, drawer bottoms and backs take E. Grading the back one step below the face saves cost on every sheet.
Core and construction
Which core suits birch plywood: Styrax or Eucalyptus
Choose white Styrax when you want a light panel with a pale, even edge and more sheets per container; choose Eucalyptus when the job wants a heavier, denser panel. Styrax-core birch plywood weighs about 500 kg/m³, Eucalyptus 650–750 kg/m³. Many European furniture buyers choose Styrax for its weight and clean face.
| White Styrax core | Eucalyptus core | |
|---|---|---|
| Density | About 500 kg/m³ | 650–750 kg/m³ |
| 18 mm sheet, 1220 × 2440 mm | About 26.8 kg | About 34.8–40.2 kg |
| 12 mm sheet, 1220 × 2440 mm | About 17.9 kg | About 23.2–26.8 kg |
| 9 mm sheet, 1220 × 2440 mm | About 13.4 kg | About 17.4–20.1 kg |
| Edge look | Pale, even layers close to the birch face | Pinkish-brown layers, darker than the face |
| Container load | Up to 18 bundles, 53–54 m³ per 40HC | Up to 15 bundles, about 43 m³ by volume |
| Best for | Furniture, CNC parts, flat-pack, export loads where freight per sheet counts | Heavier furniture parts and buyers who specify a minimum panel density |
Vietnam grows no birch, so a Vietnamese birch panel always has a local core. Our birch plywood uses Styrax or Eucalyptus; acacia, at about 580 kg/m³, belongs to commercial and film-faced lines. A full-birch panel with birch in every ply is a different product, made in birch-growing countries; our range is birch-faced.
The core is where two birch quotes really differ. We lay grade A core veneers and stitch them horizontally and vertically so joints stay closed under the press. The outer plies are stitched as standard; every ply is stitched when your CNC or exposed-edge work calls for it.
Ply count follows thickness. Thin panels of 3–6 mm are always five plies: a 3 mm panel has one core veneer, two cross-bands and two faces; 4, 5 and 6 mm panels have three core veneers and two faces. An 18 mm panel carries 11–13 plies, most often 11. Core veneers run 1.4–2.0 mm before pressing.
Our furniture-grade birch plywood is pressed twice as standard. Core veneers are peeled from plantation logs, dried, glued and laid up crosswise, then hot-pressed into a core board. That board is calibrated by sanding, the birch face and back are laid on, and the panel is pressed again: about 110–120 °C for MR glue, 130–145 °C for phenolic WBP. Final sanding, polishing and grading follow.
Sheet weights are calculated from the core densities and sheet volume.
Glue and emission
Is birch plywood waterproof? Glue choice and E0 emission results
No plywood is waterproof by its face; water resistance comes from the glue. Our standard UF glue at E0 emission is made for dry interiors such as furniture and cabinets. For humid rooms or outdoor exposure we press with melamine-fortified MR or phenolic WBP glue, and the panel edges still need sealing.
| Glue | Use it for | Emission |
|---|---|---|
| UF (standard), at E0 emission | Furniture, cabinets, wardrobes, dry interiors | E0; ASTM D6007 chamber tests 0.014–0.032 ppm, April 2025 – June 2026 |
| E1 | Interior furniture where E1 is the specified class | E1 |
| MR / melamine-fortified | Kitchens, bathrooms, humid interiors, 12-hour boil specifications | Made to the emission class you specify |
| Phenolic WBP | Exterior exposure, vehicle and outdoor parts with sealed edges | Made to the emission class you specify |
Glue type and emission class are two separate lines on a birch plywood order. The glue line sets how the bond behaves in moisture; the emission class sets how much formaldehyde the panel gives off. Write both, for example "glue: UF interior" plus "emission: CARB P2", or "glue: phenolic WBP" plus the emission class you need.
The standard interior glue holds through a boil test of about six hours on the sample. A 12-hour boil specification calls for melamine-fortified glue, and phenolic WBP is the choice for exterior exposure. Each water-resistant glue is made to the emission class you specify. A boil test checks the bond; emission is a separate line.
Every emission figure on this page comes from a chamber test. Shanghai Hongjun and ICTT Vietnam ran six third-party chamber tests to ASTM D6007 between April 2025 and June 2026, on 9, 15 and 18 mm panels. They averaged 0.014–0.032 ppm. The CARB Phase 2 and TSCA Title VI limit for hardwood plywood with a veneer core is 0.05 ppm. E0 testing repeats every 3 months.
Our furniture panels are made for the European market and meet the emission requirements European buyers ask for, including REACH entry 77 for furniture and wood-based articles from 6 August 2026. European importers accept our CARB P2 / TSCA Title VI certification and chamber tests as the proof. When your market wants a report to a European method, such as EN 717-1, SGS tests our panels to it on request.
If your drawing names a service class, quote it: EN 636-1 for dry interiors, EN 636-2 for humid interiors, EN 636-3 for exterior. We match the glue to that class.
Related: CARB composite wood products programme.
Sizes and cutting
Birch plywood sizes, thickness and cut-to-size panels
Birch plywood sheets come in 1250 × 2500 mm, the usual European format, and 1220 × 2440 mm for buyers working in feet, in any thickness from 3 to 40 mm. We also press custom formats such as 1220 × 2500 mm and 1220 × 2280 mm, and cut one panel into 4, 6 or 8 pieces ready for the line.
| Standard sheets | Both standard formats in any thickness from 3 to 40 mm |
|---|---|
| Custom formats | Pressed to your size up to the European format |
| Tolerance by dimension | Thickness down to ±0.2 mm on sanded furniture panels; length and width ±2 mm |
| Cut to size | One panel cut into 4, 6 or 8 pieces, packed by part, with the face grade and tolerance of the full sheet |
Cut-to-size loads go regularly to Italy and other European markets. The panel is pressed and sanded at full size, then cut, so the face grade and tolerance stay the same on every piece, and parts arrive packed by part number.
Pick thickness by the part. 3–6 mm covers drawer bottoms, cabinet backs and bending parts; 9–12 mm suits drawer sides and light shelving; 15–18 mm is the carcass and door thickness for most furniture; 21–25 mm and above takes worktops, heavy shelves and fixtures. Larger parts are cut from the standard sheets.
Applications
What birch plywood is used for
Birch-faced plywood is used where a pale, fine-grained face must look good under a clear or light finish: kitchen and bathroom cabinets, wardrobes, drawer boxes, shop fittings, CNC-cut furniture parts and wall panelling. The core is chosen for weight and the glue for the room the furniture goes into.
01
Kitchen and bathroom cabinets
Birch plywood is good for cabinets. Use 15–18 mm for carcasses and doors, D+ or D faces on visible parts, and melamine-fortified glue for kitchens and bathrooms. The ±0.2 mm tolerance keeps hinge and drawer-runner holes in line across a run of cabinets.
02
Wardrobes and case goods
Wardrobe sides, shelves and tops in 15–18 mm on a Styrax core keep the furniture light to ship and assemble. A D face takes clear lacquer; E faces suit parts that are painted or laminated.
03
Shop fittings and retail displays
Display units, counters and shelving for stores and offices, often with an exposed layered edge. Ask for all plies stitched when edges stay visible after CNC routing.
04
CNC furniture parts and flat-pack
Even thickness keeps router depth constant from sheet to sheet. Cut-to-size pieces in 4, 6 or 8 parts arrive ready for edge banding and drilling.
05
Wall panelling and interior joinery
UV-ready birch faces for wall panels, ceilings and built-in joinery, finished on site or on your own UV line.
06
Drawer boxes and thin parts
Drawer sides in 9–12 mm and bottoms in 4–6 mm. Thin panels are always five plies, which keeps a 4 mm drawer bottom flat and even across the sheet.
Birch-faced panels are the wrong choice for boat hulls, structural floors and any part sold as marine plywood, and for designs where a solid birch edge through every ply is the look. For concrete formwork, film-faced plywood on a hardwood core does the job at lower cost.
Compare
Vietnamese birch-faced plywood vs Baltic birch and other faces
Vietnamese birch-faced plywood gives the birch look on both faces at a lower cost than Baltic full-birch, with a lighter Styrax option, tight tolerance and production in 15–45 days after deposit. Baltic full-birch has birch in every ply and remains the reference when the layered birch edge itself is the design.
| Birch-faced, Vietnam (Minh Thanh) | Baltic full-birch | Poplar or EV faced, Vietnam | |
|---|---|---|---|
| Construction | Birch face and back over a stitched Styrax or Eucalyptus core | Birch veneer in every ply | Poplar or engineered veneer over the same Vietnamese cores |
| Face look | Pale cream birch, fine grain; graded D+, D and E (close to B to C) | Pale cream birch, fine grain; graded B to C | Poplar: plain cream. EV: uniform printed-look grain in many colours |
| Edge look | Layered edge in the core species colour | Even birch layers, the known 'Baltic edge' | Layered edge in the core species colour |
| Density | Styrax about 500 kg/m³; Eucalyptus 650–750 kg/m³ | Birch throughout, a dense panel | Same as the core chosen |
| Thickness tolerance | Down to ±0.2 mm, sanded and polished | Set by the mill and grade | Down to ±0.2 mm on furniture panels |
| Glue and emission | Chamber-tested UF glue at E0 emission as standard; water-resistant glues to the emission class you specify | Depends on the mill | UF interior glue at E0 emission as standard; WBP to the emission class you specify |
| Sizes | 1220 × 2440, 1250 × 2500 mm, custom and cut-to-size | Mill formats | 1220 × 2440, 1250 × 2500 mm, custom and cut-to-size |
| Cost | Lower than full-birch; birch face is the main premium | Highest of the three | Lowest of the three for a natural-wood face |
| Best fit | Cabinets, wardrobes, drawers, shop fittings, CNC parts | Exposed-edge design and drawings that call for birch in every ply | Painted, foiled or EV-look furniture |
Birch plywood costs more than poplar or eucalyptus faces for one reason: the birch veneer is imported and graded, while poplar and eucalyptus faces are cheaper woods. On a birch-faced panel the price then moves with face grade, the core species, glue type, thickness and the share of thin sheets in the order. Full-birch panels cost more again because every ply is birch.
When two birch quotes differ, the panels are rarely the same construction. The difference comes from core grade, joining method, face preparation, adhesive system and tolerance. Put both offers on the same spec lines from our table before comparing prices.
Supply changed in 2022. The EU banned imports of wood products from Russia, including plywood, from 9 April 2022 under Regulation (EU) 2022/576, after similar measures on Belarus from 3 March 2022 under Regulation (EU) 2022/355. Furniture makers who had built their ranges on Russian and Belarusian full-birch moved part of their volume to birch-faced panels from Vietnam and other origins.
Against the other faces we press on the same cores, birch is the natural pale face for clear finishes. Poplar is plainer and cream, the usual base for paint and foil. EV gives perfectly even grain in many colours. Okoume is a soft pinkish-beige face, light in weight, and eucalyptus faces are light pinkish-brown with a fine interlocked grain.
Birch-faced plywood replaces full-birch wherever the face is what the customer sees: cabinet fronts and sides, wardrobes, drawers and shop fittings. Keep full-birch where the exposed birch edge is the design or a drawing calls for birch in every ply. Many importers now buy both, each for the job it does best.
Quality control
How birch plywood is checked before loading
Every birch order is checked against the sample you approved: face grade sheet by sheet, thickness with a digital caliper, flatness, edge and core, and the bundle count. You receive photos and phone clips of your own sheets before the container is closed, and you can send your own inspector.
- Approve a sample
we send free samples in your thickness, face grade and core; the approved sheet becomes the grading standard.
- Grade every face
sanded sheets are graded one by one against the approved sample, face and back separately.
- Measure thickness
a digital caliper reads several points on sheets from each bundle, to the ±0.2 mm furniture tolerance.
- Check the edge and core
stitched core layers, closed joints and an even glue line are checked at the sheet edge.
- Weigh a sheet
on request, a production sheet is weighed on camera to confirm the core species against the expected 500 or 650–750 kg/m³ density.
- Film and photograph
sheets are turned over on camera, the stack edge and caliper readings are filmed, and the clips go to you before loading.
- Count and load
bundles are counted, marked and photographed in the container; third-party inspection is welcome before loading.
On arrival, repeat three checks before the panels go into production. Weigh one 18 mm sheet of 1220 × 2440 mm: about 26.8 kg points to a Styrax core, 34.8–40.2 kg to Eucalyptus. Read thickness with a caliper on several sheets. Look at the edge of a few bundles for an even layer pattern and closed joints.
Choosing a birch plywood manufacturer in Vietnam comes down to proof. Ask for the mill's own CARB P2 number, an emission test report with method and dates, a clip of real sheets turned over, an edge photo and a caliper reading. We send all five within hours of your request.
Certificates and documents
Birch plywood certificates and EUDR documents
Minh Thanh Plywood holds CARB P2 / TSCA Title VI certification as ICTT mill no. 23024, ISO 9001:2015 and TCVN 11902:2017. We supply the EUDR compliance dossier (origin records and geolocation files) and an SGS packaging test under the EU PPWR. FSC and CE are available*.
SGS, September 2026
PPWR packaging test
Regulation (EU) 2025/40: lead, cadmium, mercury and hexavalent chromium not detected in all four packaging materials; pass against 100 mg/kg
View document →ASTM D6007; Shanghai Hongjun and ICTT Vietnam
Formaldehyde test reports
E0 tested every 3 months; 0.014–0.032 ppm on 9, 15 and 18 mm panels
View document →Per order
EUDR dossier
EUDR compliance dossier: origin records and geolocation files with your order
View document →Available*
FSC
FSC-certified birch plywood on request
Available*
CE (EN 13986)
For panels placed on the EU market as construction products
Check a CARB or TSCA claim by the mill number. Our number, 23024, appears on the certificate issued by ICTT, and the US EPA lists the third-party certifiers recognised under TSCA Title VI. ISO and TCVN certificates carry their numbers as shown.
The cores are Vietnamese plantation timber grown around Ha Hoa, and the face is imported birch veneer. We supply the EUDR dossier with every EU order, ready for your due diligence statement. Vietnam is classed as low risk under Implementing Regulation (EU) 2025/1093.
EUDR applies from 30 December 2026 to plywood importers. There is no EUDR certificate: the importer files the due diligence statement, and our dossier gives the origin records and geolocation behind it.
*Supplied directly or through qualified partner mills.
Packing and loading
Birch plywood packing: sheets and m³ per 40HC
A 40HC carries up to 18 bundles of Styrax-core birch plywood, about 53–54 m³, or up to 15 bundles of the heavier Eucalyptus core. Each bundle stands about 1,000 mm high, so sheets per bundle equal 1,000 divided by the thickness. For 18 mm that is 55 sheets a bundle and 990 sheets a container.
| Thickness (mm) | Sheets per bundle | Styrax core: sheets per 40HC (18 bundles) | Eucalyptus core: sheets per 40HC (15 bundles) |
|---|---|---|---|
| 4 | 250 | 4,500 | 3,615 |
| 6 | 166 | 2,988 | 2,400 |
| 9 | 111 | 1,998 | 1,605 |
| 12 | 83 | 1,494 | 1,200 |
| 15 | 66 | 1,188 | 960 |
| 18 | 55 | 990 | 795 |
| 25 | 40 | 720 | 570 |
The table is for 1220 × 2440 mm sheets. Eighteen bundles load as 16 lying flat, four by four, plus two standing at the door end. We keep to that layout: overloaded bundle feet break, and a container packed past it ends up unloaded by hand.
Eucalyptus-core sheets are heavier, so the load is set by weight rather than space: fifteen bundles fill about 43 m³ by volume. Mixed thicknesses load in one container, each bundled and marked separately.
Each bundle is wrapped against moisture and dust, strapped, protected at the corners and marked with thickness, grade and glue. Export pallets, your own labels and edge stamping are available on order. Plan any mix of thicknesses with our packing calculator.
Calculated from a 1,000 mm bundle height and the bundle limits per core. Eucalyptus at 650 kg/m³ stays within 28,000 kg of panels, so its bundles hold a few sheets fewer.
Trade terms
MOQ, lead time, payment and samples
The minimum order for birch plywood is one 40HC container, production takes 15–45 days after the deposit, and payment is 30% deposit with 70% against the scanned B/L. We ship FOB Hai Phong, CFR or CIF, accept mixed loads by agreement and send free samples.
| MOQ | 1×40HC; mixed thicknesses, grades and faces by agreement |
|---|---|
| Production time | 15–45 days after deposit, by quantity and specification |
| Payment | 30% deposit, 70% against scanned B/L; T/T or irrevocable L/C at sight |
| Incoterms | FOB Hai Phong, CFR or CIF |
| Samples | Free samples |
| Documents | Commercial invoice, packing list, bill of lading, certificate of origin, insurance on CIF, plus CARB/TSCA, test reports and the EUDR compliance dossier |
| Replies | Within hours, Monday–Friday, Vietnam time (UTC+7) |
Production time runs from the deposit to cargo ready at the factory. Sea transit from Hai Phong is added on top and depends on the destination port and the carrier; on CFR and CIF terms we book the vessel and quote the route with the price.
Thin birch panels in 4 mm can take longer, because premium thin veneer is scarce and we do not lower the grade to go faster. Tell us your required arrival date and we plan production backwards from it.
How to order
How to order birch faced plywood in six steps
Send the six lines of your specification, approve a quotation and sample, pay the deposit, and we produce, check and load. Most first orders go from enquiry to a loaded container in the 15–45 days of production plus the time to agree the sample.
- Send your specification
application, core, glue and emission class, face and back grade, thickness and sheet size, packing and quantity, plus your destination port.
- Receive the quotation
price per m³ by thickness, FOB Hai Phong, CFR or CIF, with the spec lines repeated so you can check every item.
- Approve the sample
free samples in your grade and core; the approved sheet becomes the grading standard for production.
- Confirm the proforma and pay the deposit
30% by T/T, or open an irrevocable L/C at sight.
- Production and inspection
15–45 days; photos, clips and caliper readings of your sheets before loading.
- Loading and documents
container photos, draft documents for your approval, then the scanned B/L against the 70% balance.
Write these lines on the purchase order so the panel that arrives is the panel you priced: face and back grade (for example D+/D), core species named (Styrax or Eucalyptus, never just "hardwood"), core stitching, glue type, emission class and test method, thickness with tolerance, sheet size, UV-ready faces if you coat, edge sealing if needed, certificates, packing and labels.
FAQ
Birch plywood Vietnam: questions from importers
Short answers to the questions importers ask most about birch plywood from Vietnam: what it is, whether it is waterproof, which core to choose, how it compares with Baltic birch, why birch costs more, and how to order.
What is birch plywood?
Birch plywood is plywood with birch veneer on the outside. In Baltic full-birch every ply is birch; in Vietnamese birch plywood the face and back are imported birch veneer over a local hardwood core. Minh Thanh Plywood makes birch-faced panels on white Styrax or Eucalyptus cores, 3–40 mm thick, for furniture and interiors.
Is birch plywood waterproof?
No, birch plywood is not waterproof; its water resistance depends on the glue. UF interior glue at E0 emission is for dry rooms. Melamine-fortified glue suits kitchens, bathrooms and 12-hour boil specifications, and phenolic WBP glue suits exterior exposure. Seal the edges of any panel used in wet conditions.
Can Vietnam produce full birch plywood with a birch core?
No. Vietnam grows no birch, so Vietnamese birch plywood uses imported birch only for the face and back. The core is Vietnamese plantation timber; ours is white Styrax or Eucalyptus. Panels with birch in every ply are made in birch-growing countries.
Which core is best for birch plywood from Vietnam?
White Styrax is the best core for most furniture: about 500 kg/m³, pale edge, and up to 18 bundles per 40HC. Choose Eucalyptus, 650–750 kg/m³, when your specification asks for a heavier, denser panel. Both cores are stitched horizontally and vertically.
How does Vietnamese birch plywood compare with Baltic birch?
Vietnamese birch plywood gives the same pale birch face at a lower cost, on a lighter Styrax core if you want one, and ships after 15–45 days of production. Baltic birch carries birch in every ply, so its edge shows even birch layers. Choose birch-faced for cabinets, wardrobes and shop fittings, and full-birch where the exposed edge is the design.
Why is birch plywood so expensive?
Birch costs more than other faces because the birch veneer is imported and sorted by grade, while poplar and eucalyptus face veneers come from cheaper local wood. On a birch-faced sheet the price then follows the face grade, core species, glue and thickness. Baltic full-birch costs more still, since every ply is birch.
Is Vietnamese birch plywood cheaper than Baltic birch?
Yes. A birch-faced panel uses birch only on the two faces, so it costs less than Baltic full-birch of the same thickness. For cabinet and furniture parts where the face is what people see, it gives the birch look for less.
What is birch plywood used for?
Birch plywood goes into kitchen and bathroom cabinets, wardrobes, drawers, shelving, store fixtures, CNC-cut parts and wall panels. The pale, fine-grained face takes clear lacquer, paint, HPL or UV coating.
Is birch plywood good for cabinets?
Yes. Birch-faced plywood is a standard cabinet material: 15–18 mm for carcasses and doors, D+ or D faces on visible parts, and melamine-fortified glue for kitchens and bathrooms. Our ±0.2 mm tolerance keeps hinge and runner positions in line.
How is birch plywood made?
Our birch-faced plywood is pressed twice. Dried core veneers are stitched both ways, laid crosswise with glue and hot-pressed into a core board; the board is sanded to calibrated thickness, then the birch face and back are pressed on. The panel is sanded, polished, graded and packed.
Does Vietnamese birch plywood meet European standards?
Yes. Our furniture panels are made for the European market and meet the emission and quality requirements European buyers ask for. The proof is our CARB P2 / TSCA Title VI certificate (ICTT mill no. 23024) and six chamber tests at 0.014–0.032 ppm, which European importers accept. For a report to your own method, such as EN 717-1, SGS tests our panels on request. We also supply the EUDR compliance dossier, ISO 9001:2015 and the 1250 × 2500 mm European format.
Which birch face grades can I order, and which matches B/BB?
Vietnamese mills grade birch faces D+, D and E, from the top face down, and quote face and back as a pair such as D+/D or D/E. D+ is close to European B/BB, D to BB/CP and E to CP/C. We fix the grade against a sample sheet you approve and grade every production sheet against it.
How many sheets of birch plywood fit in a 40HC container?
About 990 sheets of 18 mm Styrax-core birch plywood fit in a 40HC: 18 bundles of 55 sheets, about 53–54 m³. Eucalyptus-core loads stop at 15 bundles of 53, 795 sheets of 18 mm (about 43 m³), because the sheets are heavier.
What is the minimum order and lead time for birch plywood?
One 40HC container is the minimum, and it can mix thicknesses and grades by agreement. Production runs 15–45 days from the deposit, with sea transit on top by destination. Payment is 30% deposit and 70% against the scanned B/L.
How do I choose a birch plywood manufacturer in Vietnam?
Ask for proof a real factory can send at once: its own CARB P2 mill number, an emission test with method and dates, a clip of sheets being turned over, a photo of the core edge and a caliper reading. Minh Thanh Plywood sends all of these within hours, and free samples, before you order.
Request a quote
Get a birch plywood quotation
Tell us the application, core, glue, face grade, thickness, size and quantity, and Lisa replies within hours with a quotation and sample offer. Attach up to 3 drawings or specification files.
Start with the application and we can advise the rest: core, glue and emission class, face and back grade, thickness and sheet size, packing, quantity and your destination port. Email [email protected] or WhatsApp Lisa on +84 988 586 601. Free samples.
[email protected]Related: contact the sales team, plywood catalogue.