CARB P2 / TSCA VI certifiedISO 9001:2015E0 tested every 3 monthsEUDR geodataPPWR testedCertificates and test resultscontact@minhthanhplywood.comWhatsApp +84 988 586 601

Plywood blog · 85 guides

Plywood core and glue

Plywood core and glue are separate order decisions. Minh Thanh Plywood compares core types and water-resistant bonds. The plywood bond guides keep exposure and emission requirements separate.

Start here

Plywood core and glue: Is plywood waterproof: natural veneer and dark film-faced plywood samples with visible layered edgesCores & glue22 min read ·

Is Plywood Waterproof? Bonds, Edges and Uses

Is plywood waterproof? Compare water resistant plywood, exterior bonds, film faces and edge protection before specifying a panel for furniture or outdoor use.

Plywood core and glue: core types and plywood bond guides

Cover of “Film Faced Birch Plywood vs Hardwood Formply”: 680 kg/m³ birch; 650 kg/m³ eucalyptus; 580 kg/m³ acacia; 795 vs 880 sheets per 40HCCores & glue14 min read

Film Faced Birch Plywood vs Hardwood Formply

Film faced birch plywood vs hardwood formply on eucalyptus or acacia: density, sheet weight, container load, reuse and a verdict for each formwork job.
Cover of “Class 2 vs Class 3 Plywood: Which to Buy”: 24 h + 6 h separate tests, class 2; 72 h boil, class 3; 11–13 plies at 18 mm; 130–145 °C phenolic pressCores & glue18 min read

Class 2 or 3 Plywood: Which to Buy

Class 3 plywood has an exterior bond tested by boiling under EN 314-2; class 2 suits humid or covered use. Tests, glue, labels, 18 mm specs and ordering.
Cover of “Eucalyptus Plywood vs Birch Plywood: Key Differences”: 26.8 vs 34.8 kg Styrax vs Eucalyptus, 18 mm; 990 vs 795 sheets per 40HC; D+ ≈ B D ≈ BB, E ≈ CP/C; US$350/m³ from (Oct 2026)Cores & glue17 min read

Eucalyptus vs Birch Plywood: Key Differences

Eucalyptus plywood vs birch plywood: sheet weight, strength, moisture, colour, finishing, face grades, cost and where eucalyptus can replace birch.
Cover of “Gurjan Plywood Price: What Sets the Rate per Sheet”: US$350/m³ from (October 2026); 0.0536 m³ per 18 mm sheet; 26.8 vs 34.8 kg Styrax vs Eucalyptus, 18 mmCores & glue13 min read

Gurjan Plywood Price: The Rate per Sheet

Gurjan plywood price explained: face vs full gurjan, IS 303 and IS 710 grades, core, glue, thickness, per-sheet maths and how to check a gurjan sheet.
Cover of “Hardwood vs Softwood Plywood: Which Is Which?”: 500 / 580 / 650 kg/m³ planning densities; 26.8 to 34.8 kg per 18 mm sheet; 0.05 ppm US limit, hardwood; ±0.2–0.3 mm sandedCores & glue13 min read

Hardwood vs Softwood Plywood: How They Differ

Is plywood hardwood or softwood? How species decide the class, softwood plywood vs hardwood plywood on density, weight, screw holding, standards and use.
Cover of “How Is Film Faced Plywood Made? Steps, Film and Reuses”: 120–135 g/m² film; 220 g/m² anti-slip; 12–15 / 25 pours, melamine / phenolic; ±0.5 mm toleranceCores & glue15 min read

How Is Film Faced Plywood Made? Steps and Reuses

How film-faced plywood is made in 10 steps: core veneer, lay-up, glue, double pressing, calibration, phenolic film in g/m², edge sealing and what sets reuses.
Cover of “Plywood Sealer: How to Seal Plywood Step by Step”: 8–12 % moisture at dispatch; 3 bond classes; 10 steps; 5 checksCores & glue15 min read

Plywood Sealer: How to Seal in Steps

Plywood sealer guide: which sealer suits each exposure, why the glue class matters more than the coating, edge-first sealing steps, drying times and checks.
Cover of “Veneering Plywood: Glue, Press and Steps”: 9 steps; 0.2–0.5 mm face veneer; 110–145 °C press, MR to WBP; ±0.2–0.3 mm sandedCores & glue15 min read

Veneering Plywood: Glue, Press and Steps

Veneering plywood step by step: substrate prep, veneer glue (PVA, UF, contact cement), vacuum bag or press, balancing both faces.
Cover of “Waterproofing for Plywood: Step by Step”: Class 1/2/3 EN 314-2 bonds; 8 steps; 1-2 / 3-5 years oil / paint; 8–12 % moisture at dispatchCores & glue14 min read

Waterproofing Plywood in Steps

Waterproofing for plywood in 8 steps: choose a WBP panel, seal the edges, then pick oil, water-based sealer, epoxy, paint, liquid rubber or bitumen by use.
Cover of “Water Boiled Plywood: What a Boil Test Proves”: 6 h boil, EN 314 class 2; 72 h boil, class 3 or Type A; 12-15 / 25 uses, MR / WBPCores & glue14 min read

Water Boiled Plywood: What a Boil Test Proves

Water boiled plywood and the plywood boiling water test explained: EN 314 cycles, the 72-hour Type A boil, MR vs WBP glue, reuse and what to ask in a report.
Cover of “Plywood for Cutting Board: Is It Safe?”: 11–13 plies in 18 mm; 0.05 ppm emission limit; 3 glue familiesCores & glue14 min read

Plywood for Cutting Board: Is It Safe?

Plywood for cutting board use: is it safe? UF, MUF and phenolic glue lines, emission classes, end-grain plywood boards and the woods to chop on instead.
Cover of “Mold Resistant Plywood for Hot, Humid Climates”: 8–12 % moisture at dispatch; 20 % decay threshold, about; 30 % fibre saturation, about; 130–145 °C WBP pressingCores & glue14 min read

Mold Resistant Plywood for Hot, Humid Climates

Mold resistant plywood for tropical and coastal markets: glue, core, moisture content at shipment, coatings, container sweat and what to write on the order.
Cover of “Poplar Core Plywood vs Vietnamese Hardwood Cores”: 500 kg/m³ Styrax, 26.8 kg; 650 kg/m³ Eucalyptus, 34.8 kg; 990 sheets per 40HC; US$350/m³ fromCores & glue12 min read

Poplar Core Plywood vs Vietnamese Hardwood Cores

Poplar core plywood explained: what it is, white core poplar plywood, poplar core vs eucalyptus and styrax, cabinet strength, and the Vietnamese core to order.

Work with Minh Thành Plywood

Have a plywood question? Send the specification.

Tell us the application and destination port. We reply within hours with the panel construction, a dated price and the documents for your market.

Get a quote

Contact us

Get a quote