Plywood sheet sizes follow a handful of formats. South Africa, India, the Gulf, Canada, the USA and most of Asia buy the 4 × 8 ft sheet, made as 1220 × 2440 mm. Continental Europe adds 1250 × 2500 mm and Australia quotes 2400 × 1200 mm. What changes most is the thickness set and the standard behind it. This guide gives one table per market, then the size line for an import order. Minh Thanh Plywood is a plywood manufacturer in Phu Tho, Vietnam.
Plywood sizes in South Africa
The standard plywood sheet in South Africa is 1220 × 2440 mm, sold as 8 × 4 ft, and many merchants label the same board 2400 × 1200 mm. A cutting list for either label works on the 1220 × 2440 mm sheet; the 40 mm difference only matters on a CNC nest or a tight fit, so state the millimetres on the order.
What plywood types and thicknesses do South African merchants stock?
South African merchants stock the full sheet in a wide set of thicknesses. Citiwood lists 3, 3.6, 4, 5, 6, 8, 9, 12, 15, 16, 18, 19, 21, 22, 30 and 40 mm across its plywood range, and TimBuild Woodstock stocks 4 to 25 mm with in-store cutting and delivery across Cape Town. The 18 mm sheet is the most traded for furniture and building; 21 mm is the heavier shuttering grade.
| Plywood type in South Africa | Sheet size (mm) | Thicknesses merchants list (mm) | Typical use |
|---|---|---|---|
| Pine plywood BB and BC | 2440 × 1220 | 4, 6, 9, 12, 15, 18, 21 | Shelving, ceilings, packing, general building |
| Shutterply C+/C untreated | 2440 × 1220 | 18, 21 | Concrete formwork |
| Film-faced plywood | 2440 × 1220 | 12, 15, 18, 21 | Reusable formwork |
| Birch and birch oak plywood | 2440 × 1220 | 3, 4, 6, 9, 12, 15, 18 | Furniture, cabinets, interiors |
| Poplar plywood | 2440 × 1220 | 3, 4, 6, 9, 12, 15, 18 | Furniture and joinery |
| Hardwood exterior plywood | 2440 × 1220 | 6, 9, 12, 15, 18 | Outdoor and wet areas |
| Marine plywood | 2400 × 1200 | 9, 12, 18, 21 | Boats and wet areas |
| Bendy ply, long grain and short grain | Merchant sizes | By merchant | Curved panels and radius work |
| Bamboo plywood, vertical | Merchant sizes | By merchant | Worktops, shelving and wall panels |
What do plywood sheets cost in South Africa?
Merchant prices in October 2026 run from about R470 for an 18 mm shutterply C+/C sheet to R901.70 for an 18 mm pine BB sheet, both excluding VAT. Timber Merchant lists marine ply at R665.00 to R830.00 per sheet for 18 and 21 mm, and R1,020.00 to R1,270.00 for 9 and 12 mm, excluding VAT.
| Sheet, South African merchant listing | Price per sheet, excl. VAT |
|---|---|
| Shutterply C+/C, 18 mm | R470.00 |
| Pine ply BB, 18 mm | R901.70 |
| Marine ply, 18 and 21 mm | R665.00 to R830.00 |
| Marine ply, 9 and 12 mm | R1,020.00 to R1,270.00 |
An importer buys the same 1220 × 2440 mm sheet by the container. Our furniture plywood starts from US$350/m³ and commercial plywood from US$250/m³ FOB Hai Phong; an 18 mm 1220 × 2440 mm sheet holds 0.0536 m³, a raw FOB example of about US$19 at the furniture rate and US$13 at the commercial rate, before the face, core, glue and quantity set the final price.
Add sea freight, import duty, 15 % import VAT, port and inland costs to compare it with the shelf prices above. Sea transit from Hai Phong to Durban is typically 35–50 days by carrier and route, and the general SACU customs rate on plywood is about 10 %; your clearing agent confirms the 8-digit line before you commit.
What are the standard sizes of plywood in South Africa?
The standard size of plywood in South Africa is the full 1220 × 2440 mm sheet. Half sheets of 1220 × 1220 mm and smaller cut panels are sold over the counter, but importers, joiners and shopfitters buy and price by the full sheet.
What thicknesses of plywood are standard in South Africa?
Standard plywood thicknesses in South Africa run from 3 mm to 21 mm, with 18 mm the most traded for furniture and building and 21 mm the heavier shuttering grade. Thin 3–6 mm panels serve for backs, drawer bottoms and ceilings; 9–12 mm for general building; 15–18 mm for cabinets and shelving. Specialist ranges add 3.6, 16, 19, 22, 30 and 40 mm.
For South African furniture makers who import, the factory sheet is the same 1220 × 2440 mm, so no cutting plan changes. A 40HC from Hai Phong to South Africa runs on the West Africa or Indian Ocean routes; typical days at sea from Hai Phong to West Africa are 35–50, by carrier and route.
Plywood sheet sizes by country: the short answer
Most of the world buys plywood in one sheet size: 4 × 8 ft, made in metric as 1220 × 2440 mm. South Africa, India, the Gulf, Canada, the USA, the UK and most of Asia use it as their full sheet. Continental Europe adds 1250 × 2500 mm. Australia quotes 2400 × 1200 mm, Japan adds 910 × 1820 mm, and Sweden sells 900 × 2500 mm panels.
| Market | Main sheet (mm) | Other common sheets (mm) | Usual thickness set (mm) | Main standard or mark |
|---|---|---|---|---|
| South Africa | 1220 × 2440 (8 × 4 ft) | Cut panels | 3, 4, 6, 9, 12, 15, 18, 21 | Retail and shutterply grades |
| India | 1220 × 2440 (8 × 4 ft) | 7 × 4, 6 × 4, 8 × 3, 7 × 3, 6 × 3 ft | 4, 6, 9, 12, 16, 19, 25 | IS 303, ISI mark |
| UAE and Saudi Arabia | 1220 × 2440 (8 × 4 ft) | Cut panels | 3, 6, 9, 12, 15, 18, 25 | Gulf conformity schemes |
| Canada | 4 × 8 ft | 4 × 9, 4 × 10 ft | 9.5, 12.5, 15.5, 18.5 | CSA O121, CSA O151 |
| USA | 4 × 8 ft | 4 × 10 ft | Nominal 1/4 to 3/4 inch | PS 1, PS 2, TSCA Title VI |
| Continental Europe | 1250 × 2500 | 1220 × 2440, 1525 × 1525 | 4 to 40 | EN 636, EN 13986 |
| Sweden | 1200 × 2400, 1220 × 2440 | 900 × 2500 | 12, 15, 18 | EN 636 |
| Australia and New Zealand | 2400 × 1200 | 2700 × 1200, 3000 × 1200 | 7 to 25 | AS/NZS 2269 |
| Singapore, Malaysia, Indonesia | 1220 × 2440 | 915 × 1830 | 3 to 25 | Buyer or project standard |
| Japan | 910 × 1820, 1220 × 2440 | 910 × 2430 | 2.5 to 24 | JAS |
The width and length differ by only a few centimetres between the metric and imperial versions, but a cutting plan built for one does not fit the other. The safest order names both the millimetre size and, where the market uses it, the foot size.
Plywood sizes in India
Plywood sizes in India follow the foot system: the full sheet is 8 × 4 ft, made in metric as 1220 × 2440 mm, and smaller standard sheets of 7 × 4, 6 × 4, 8 × 3, 7 × 3 and 6 × 3 ft are sold for doors, cabinets and furniture parts.
| Size in India (ft) | Size (mm, metric make) | Typical use |
|---|---|---|
| 8 × 4 | 1220 × 2440 | Furniture, wardrobes, kitchens, partitions |
| 7 × 4 | 1220 × 2135 | Wardrobes and doors with less waste |
| 6 × 4 | 1220 × 1830 | Cabinets, shelving |
| 8 × 3 | 915 × 2440 | Long narrow parts, door shutters |
| 7 × 3 | 915 × 2135 | Doors |
| 6 × 3 | 915 × 1830 | Small furniture parts |
Plywood thicknesses in India
Indian buyers quote 4, 6, 9, 12, 16, 19 and 25 mm, which differ from the 15 and 18 mm steps used in most export markets. A 19 mm sheet is the Indian furniture standard where Europe would use 18 mm, and 25 mm is common for doors and heavy furniture.
| Thickness in India (mm) | Use |
|---|---|
| 4, 6 | Backs, drawer bottoms, laminate substrate |
| 9, 12 | Partitions, cabinet sides |
| 16, 19 | Carcases, wardrobes, kitchens |
| 25 | Doors, heavy tops, bed bases |
Indian buyers ask for plywood made to IS 303, the general-purpose standard, or IS 710 for marine plywood, carrying the ISI mark under a licence from the Bureau of Indian Standards. Typical days at sea from Hai Phong to Indian ports sit between the South-East Asia and Middle East ranges.
Plywood sizes in the UAE and Saudi Arabia
Plywood sizes in the UAE and Saudi Arabia follow the 8 × 4 ft sheet, quoted as 2440 × 1220 mm. Gulf merchants stock 3 to 25 mm, with 18 mm the main thickness for both joinery and film-faced formwork.
| Plywood type in the UAE and Gulf | Sheet size (mm) | Common thicknesses (mm) | Use |
|---|---|---|---|
| Commercial MR plywood | 2440 × 1220 | 3, 4, 6, 9, 12, 15, 18, 25 | Furniture, interiors in dry rooms |
| BWP / WBP plywood | 2440 × 1220 | 6, 9, 12, 18 | Kitchens, bathrooms, damp areas |
| Marine plywood | 2440 × 1220 | 6, 9, 12, 15, 18 | Boats, wet zones |
| Film-faced plywood | 2440 × 1220 | 12, 15, 18, 21 | Concrete formwork on towers and villas |
| Fancy (decorative face) plywood | 2440 × 1220 | 3, 4, 6 | Wall panelling, furniture faces |
What is the plywood size in the UAE for joinery?
The plywood size used for joinery in the UAE is the same 2440 × 1220 mm sheet, mostly 18 mm for carcases and 6 mm for backs. Joinery shops in Dubai and Sharjah plan their cutting lists on this sheet, so a supplier offering 1250 × 2500 mm should say so clearly in the quotation.
Saudi Arabia requires product conformity through the SABER platform, and the UAE runs its own conformity schemes for regulated building products; the importer registers the product and the mill supplies the technical file. Typical days at sea from Hai Phong to the Middle East are 15–25, by carrier and route, the shortest export route after South-East Asia.
Plywood for kitchens and bathrooms in the UAE
Kitchens and bathrooms in the UAE need plywood with a water-resistant bond. Use melamine-fortified (MR) or phenolic (WBP) glue, not plain interior glue. Seal every face and edge before fitting. The sheet size stays 2440 × 1220 mm; the bond and the sealing make the difference in a wet room. We make MR/melamine-fortified and phenolic (WBP) bonds to the customer’s specification.
Plywood sizes in Canada: thickness chart, nominal and actual
Canada uses the 4 × 8 ft sheet, with 4 × 9 and 4 × 10 ft panels for wall sheathing, and sells softwood plywood in metric thicknesses that sit just below the nominal inch sizes. A Canadian “5/8 inch” panel is labelled 15.5 mm, and a “3/4 inch” panel 18.5 mm.
| Nominal (inch) | Canadian metric label (mm) | Typical use |
|---|---|---|
| 3/8 | 9.5 | Wall sheathing, light roof sheathing |
| 1/2 | 12.5 | Roof sheathing, wall sheathing |
| 5/8 | 15.5 | Roof sheathing, single-layer floors with close joists |
| 3/4 | 18.5 | Subfloors, shelving, formwork |
| 1 1/8 | 28.5 | Heavy floors on wide joist spacing |
Canadian softwood plywood is made to CSA O121 (Douglas fir) and CSA O151 (Canadian softwood), and hardwood and decorative plywood for cabinets is often 18 or 19 mm on the same sheet. For imported furniture and cabinet plywood, Canadian buyers ask for the composite-wood formaldehyde rules that match the US, and the US TSCA Title VI rule for composite wood products, 40 CFR Part 770, is the reference most North American cabinet makers know. Our furniture panels are certified CARB P2 / TSCA Title VI (ICTT mill no. 23024), and we supply them on the 1220 × 2440 mm sheet.
Standard plywood thicknesses in Canada: nominal and actual
Standard plywood thicknesses in Canada are labelled in millimetres, with the nominal inch size beside them: 9.5 mm (3/8 inch), 12.5 mm (1/2 inch), 15.5 mm (5/8 inch) and 18.5 mm (3/4 inch). Sanded panels can be slightly thinner than the label, so cabinet makers measure the sheet before setting dado widths.
Plywood 900x2500 and plywood 1500 x 2400: Swedish and Nordic formats
Plywood 900x2500 is a Swedish construction format: spruce plywood 900 × 2500 mm, sold by builders’ merchants at 12 and 15 mm for walls and floors. Searches for plywood 1500 x 2400 and plywood 800x1200 also come mostly from Sweden, where merchants sell plywood in several construction and cut formats beside the European 1250 × 2500 mm sheet.
| Format in Sweden (mm) | Typical material | Typical use |
|---|---|---|
| 900 × 2500 | Spruce construction plywood, 12 and 15 mm | Wall lining, roof and floor decking a person can carry |
| 1200 × 2400 | Spruce construction plywood, 12 to 18 mm | Walls, floors, sheds |
| 1220 × 2440 and 1250 × 2500 | Birch and hardwood plywood | Furniture, interiors, vehicles |
| 1500 × 2400 | Wide sheets | Fewer joints on floors and walls |
| 800 × 1200 | Cut panels | Pallet tops, shelves, small projects |
Plywood 800x1200: the pallet-size panel
A plywood 800x1200 panel matches the footprint of the standard EUR pallet, 800 × 1200 mm, so it is used as a pallet top sheet, a layer pad between goods and a shelf or workshop board. Importers do not need a special press for it: three 800 × 1200 mm panels cut from one 1220 × 2440 mm sheet with narrow strips left over.
Where does the 1500 x 2400 sheet come from?
The 1500 × 2400 mm sheet is a wide format that suits floors and walls where fewer joints matter more than handling weight. Importers who want wide panels for furniture usually choose 1250 × 2500 mm, or order cut-to-size parts that remove the need for a wide sheet.
Typical days at sea from Hai Phong to Northern Europe are 30–40, by carrier and route.
Plywood sizes in Europe and the UK
Continental Europe uses 1250 × 2500 mm as its main metric plywood sheet, beside 1220 × 2440 mm, while the UK stays with 2440 × 1220 mm (8 × 4 ft). The 1250 × 2500 mm sheet is two 625 mm modules wide and four long, the module European building systems are planned on.
| Market | Main sheet (mm) | Other formats (mm) | Notes |
|---|---|---|---|
| Germany, Austria, Benelux | 1250 × 2500 | 1220 × 2440, 1500 × 3000, 1525 × 1525 | Metric sheet for furniture and building |
| Italy, Spain, France | 1220 × 2440 and 1250 × 2500 | 1220 × 2500 | Furniture plants order both |
| Poland, Baltics | 1250 × 2500 | 1525 × 1525, 1500 × 3000 | Birch sizes |
| UK and Ireland | 2440 × 1220 | 2500 × 1250, 3050 × 1220 | 8 × 4 ft sheet |
European plywood for construction is classed for its service conditions (dry, humid or exterior use) under EN 636. CE marking for construction products is required by the Construction Products Regulation (EU) No 305/2011. For wood-based panels the harmonised standard is EN 13986.
Furniture plywood is bought on face grade, core, glue and emission; our panels meet the emission and quality requirements European furniture buyers ask for, and CARB P2 / TSCA Title VI certification is the accepted proof. Our guide to 1250 × 2500 plywood explains when to choose the larger sheet. Typical days at sea from Hai Phong are 25–35 to the Mediterranean and 30–40 to Northern Europe.
Plywood sizes in the UK: 8 × 4 ft
The UK buys plywood as 8 × 4 ft, written 2440 × 1220 mm. Merchants also stock 2500 × 1250 mm and long 3050 × 1220 mm sheets. UK furniture makers plan on the 2440 × 1220 mm sheet, so the size line should say which one is meant. Typical days at sea from Hai Phong to Northern Europe are 30–40.
Plywood sizes in Australia and New Zealand
Australia and New Zealand quote plywood as 2400 × 1200 mm, the same metric module written width last, with 2700 and 3000 mm lengths for flooring, bracing and formwork. Structural plywood is made to AS/NZS 2269.
| Format (mm) | Typical use |
|---|---|
| 2400 × 1200 | Bracing, lining, furniture, general building |
| 2700 × 1200 | Wall bracing to ceiling height |
| 1800 × 1200 | Formwork and flooring |
| 2400 × 1200 × 17 | Formply for concrete formwork |
Australian thickness sets differ too: 17 mm formply and 12, 15, 17, 19 and 25 mm structural panels are typical. Our guide to plywood sizes in Australia and New Zealand covers the full set. Furniture importers in Australia often buy 1220 × 2440 mm sheets from Asian mills and cut them to their own plans.
Plywood sizes in Singapore, Malaysia and Indonesia
Singapore, Malaysia and Indonesia use 1220 × 2440 mm as the standard plywood sheet, with 915 × 1830 mm (3 × 6 ft) still traded for packing and small parts. Thicknesses follow the metric Asian set: 3, 4, 6, 9, 12, 15, 18 and 25 mm.
| Market | Main sheet (mm) | Common thicknesses (mm) | Typical demand |
|---|---|---|---|
| Singapore | 1220 × 2440 | 3, 4, 6, 9, 12, 15, 18, 25 | Interior fit-out, furniture, formwork |
| Malaysia | 1220 × 2440 | 3, 6, 9, 12, 15, 18 | Furniture, packing, construction |
| Indonesia | 1220 × 2440, 915 × 1830 | 2.4 to 18 | Furniture, packing, export panels |
Standard plywood thicknesses available in Singapore
Standard plywood thicknesses available in Singapore are 3, 4, 6, 9, 12, 15, 18 and 25 mm on the 1220 × 2440 mm sheet, with 18 mm the main carcase and formwork thickness. Fit-out contractors also buy thin 3 and 4 mm panels for curved and laminated work.
These markets are the closest to Vietnam: typical days at sea from Hai Phong to South-East Asia are 5–12, by carrier and route, so mixed containers of several thicknesses are common.
Plywood sizes in Japan, Korea and the USA
Japan buys plywood in 910 × 1820 mm (3 × 6 shaku, close to 3 × 6 ft, called saburoku) as well as 1220 × 2440 mm; Korea and the USA use 1220 × 2440 mm, with Korean formwork systems also built on 1250 mm widths.
| Market | Main sheets (mm) | Notes |
|---|---|---|
| Japan | 910 × 1820, 1220 × 2440, 910 × 2430 | JAS grading; F☆☆☆☆ low-emission class for interiors |
| Korea | 1220 × 2440, 1250 × 2500 for formwork | KS standards; E0 and SE0 emission classes |
| USA | 4 × 8 ft (1220 × 2440 metric make) | Nominal inch thicknesses; TSCA Title VI for composite wood |
US panels are sold on nominal inch thicknesses, and a “3/4 inch” sanded panel is often 23/32 inch or 18 mm. Our guide to 4x8 plywood explains the actual sizes.
Japanese buyers often order both sheets in one container: 910 × 1820 mm for interior lining and 1220 × 2440 mm for furniture. Korean formwork buyers name the 1250 mm width on the order. US cabinet makers buy the 4 × 8 ft sheet and measure the actual thickness before cutting grooves. In all three markets, the order should carry the millimetre size, the thickness tolerance and the emission class the buyer needs. Our furniture panels are made with UF glue at E0 emission, and CARB P2 / TSCA Title VI certification is the proof US buyers ask for.
Transit is short for the North Pacific markets. Japan and Korea are about 2–3 weeks from Hai Phong by sea; the US West Coast 20–30 days and the US East Coast 35–45 days. A mixed container for these markets can carry both sheet sizes when the buyer needs them, by agreement.
Plywood sizes in the Philippines
The Philippines buys plywood in 4 × 8 ft sheets, made as 1220 × 2440 mm. Buyers quote thickness in inches or millimetres. A “1/4” panel is about 6 mm. A “1/2” panel is about 12 mm. A “3/4” panel is about 18 mm.
| Quoted in the Philippines | Metric thickness | Typical use |
|---|---|---|
| 1/4 inch | about 6 mm | Ceilings, cabinet backs |
| 3/8 inch | about 9 mm | Partitions, light shelves |
| 1/2 inch | about 12 mm | Cabinet sides, walls |
| 3/4 inch | about 18 mm | Carcases, tops, formwork |
Exact inch sizes are 6.35, 9.525, 12.7 and 19.05 mm, so the metric sheet is a little thinner than the inch label. Write the millimetre value on the order. Our guide to plywood sizes in the Philippines covers the local grades. Manila is on the South-East Asia route, 5–12 days at sea from Hai Phong.
Why are plywood sheet sizes different by country?
Plywood sheet sizes differ by country because each market sized its sheet to its own building module, and tooling and stock then locked that size in. A sheet that fits the module needs no cutting on the wall, floor or roof.
- Imperial stud spacing. 4 × 8 ft divides into 16 and 24 inch stud and joist spacing, so the sheet spans whole bays in North America and the markets that followed its building practice.
- The metric module. Continental Europe planned buildings and furniture systems on modules of 625 mm and multiples of 100 mm, which gives 1250 × 2500 mm and 1200 × 2400 mm.
- Traditional modules. Japan’s 910 × 1820 mm sheet follows the traditional room module.
- Log and press size. Birch mills peel short logs and press square 1525 × 1525 mm sheets.
- Machines and stock. Once panel saws, CNC nesting tables and racks are set up for one size, buyers keep ordering it.
The practical result: an importer should buy the sheet that matches the cutting plan of the end user, not the sheet the mill finds easiest.
Feet to millimetres: why 8 × 4 ft becomes 1220 × 2440 mm
A 4 × 8 ft sheet is exactly 1219.2 × 2438.4 mm, because one inch is exactly 25.4 mm; mills round it up to 1220 × 2440 mm so that a sanded and trimmed sheet still covers the full imperial size. The metric make is therefore usually a few millimetres larger; Japan’s 910 × 1820 mm shaku size is the exception.
| Foot size | Exact size (mm) | Metric make (mm) | Markets |
|---|---|---|---|
| 8 × 4 ft | 2438.4 × 1219.2 | 2440 × 1220 | South Africa, India, Gulf, Canada, USA, UK, Asia |
| 7 × 4 ft | 2133.6 × 1219.2 | 2135 × 1220 | India |
| 6 × 4 ft | 1828.8 × 1219.2 | 1830 × 1220 | India, Asia |
| 8 × 3 ft | 2438.4 × 914.4 | 2440 × 915 | India |
| 6 × 3 ft | 1828.8 × 914.4 | 1830 × 915 | India, Indonesia, Japan (910 × 1820 make) |
| 10 × 4 ft | 3048 × 1219.2 | 3050 × 1220 | UK, North America |
The same rounding explains why a 2400 × 1200 mm Australian sheet is about 3 % smaller in area than a 1220 × 2440 mm sheet: it is a true metric size, not a converted imperial one. A cutting plan drawn for one fits the other only if every part leaves that margin.

Cutting yield: the same parts on different sheets
The best sheet for a market is the one that gives the most usable parts for its standard components. A small difference in sheet width changes how many parts fit across it once saw kerf and edge trim are counted.
| Part (mm) | Parts from 1220 × 2440 | Parts from 1250 × 2500 | Parts from 2400 × 1200 |
|---|---|---|---|
| 600 × 2400 cabinet side | 2 | 2 | 2 |
| 800 × 1200 pallet top | 3 | 3 | 3 |
| 400 × 600 drawer base | 12 | 12 | 12 |
| 610 × 1220 half-width panel | 4 | 4 | 1 |
Counts are whole parts per sheet before kerf and trim; check the narrow margins on your own saw.
Parts sized for one market’s module fit that market’s sheet best: a 610 mm wide panel, half of 1220, fits twice across a 1220 or 1250 mm sheet but not twice across 1200 mm. That is why furniture makers keep ordering the sheet their cutting lists were written for, and why cut-to-size panels from the mill are often the cheapest answer for a new market.
Which plywood size should an importer order for each market?
Order the sheet the end user’s machines and cutting plans already use, and change only when the new size saves waste on the real parts list. For most markets that means 1220 × 2440 mm.
| If you sell to | Order | Why |
|---|---|---|
| South Africa, the Gulf, India, Asia | 1220 × 2440 mm | Every merchant, joiner and cutting list uses it |
| Canada and the USA | 1220 × 2440 mm, inch thickness on the label | Matches the 4 × 8 ft trade |
| Germany, Benelux, Poland | 1250 × 2500 mm, with some 1220 × 2440 mm | Metric furniture and building systems |
| Italy, Spain, France | Both sheets, by plant | Furniture plants run both |
| UK and Ireland | 1220 × 2440 mm | 8 × 4 ft trade |
| Sweden and the Nordics | 1250 × 2500 mm or cut-to-size | Birch and hardwood panels sold in the metric sheet |
| A factory with fixed part sizes | Cut-to-size | Removes waste and saw time |
For a mixed market, one 40HC can carry more than one size: mixed loads are by agreement, usually 1–2 specifications per container and 3–6 by agreement.

Plywood thickness sets by market: what each country orders
Thickness sets differ more than sheet sizes. India orders 16 and 19 mm where Europe and South Africa order 15 and 18 mm, Canada labels 15.5 and 18.5 mm, and the USA buys nominal inch thicknesses that are thinner in the actual sheet.
| Thickness step | South Africa | India | UAE | Canada | Europe | Asia |
|---|---|---|---|---|---|---|
| Thin | 3, 4, 6 | 4, 6 | 3, 4, 6 | 6 | 4, 6 | 3, 4, 6 |
| Light | 9, 12 | 9, 12 | 9, 12 | 9.5, 12.5 | 9, 12 | 9, 12 |
| Furniture carcase | 15, 18 | 16, 19 | 15, 18 | 15.5, 18.5 | 15, 18 | 15, 18 |
| Heavy | 21 | 25 | 25 | 28.5 | 21, 24, 30 | 25 |
All values in mm. Our panels are made from 3 to 40 mm, so every step above is within our range.
Our thin plywood of 3–5 mm is always 5-ply, and our sanded furniture panels are held to a thickness tolerance of ±0.2–0.3 mm, down to ±0.2 mm, which matters most for markets that build to exact groove and hinge settings. Our plywood thickness guide explains how to choose a thickness by use.

Plywood size tolerances: what to write for each market
Size tolerance is the allowed difference between the ordered and the measured sheet, and it should be written on the order for every market. Two lines cover it: thickness and length/width.
| Product line | Thickness tolerance | Length and width |
|---|---|---|
| Sanded furniture panels | ±0.2–0.3 mm, down to ±0.2 mm | ±2 mm |
| Commercial and film-faced | ±0.5 mm | ±2 mm |
| Packing plywood | ±0.5–1.0 mm | ±2 mm |
These are our standard tolerances. Markets that cut on CNC nesting lines, such as European and Japanese furniture plants, usually ask for the tightest thickness line; formwork and packing buyers accept the wider ones.
How to check plywood sheet size on arrival
Check size on arrival with a steel tape, a caliper and a square. Measure before the packs are split up. Compare each reading with the size line on the order.
- Photograph the pack label and the closed pack.
- Take sheets from the top, middle and bottom of several packs.
- Measure length and width at both ends and the middle.
- Measure the diagonals. Equal diagonals mean a square sheet.
- Measure thickness with a caliper at four points away from the edge.
- Record the readings next to the tolerance on the order.
Length and width within ±2 mm and thickness within the written tolerance conform to the order. A reading outside it is evidence for a claim. Our guide on plywood quality claims explains how to present it.

How sheet size changes container loading
Sheet size changes the weight per sheet and the number of packs that fit a container, so the same order in a larger sheet carries fewer sheets. Our 40HC plan for 1220 × 2440 mm sheets uses packs about one metre high, with sheets per pack set by thickness and then capped by weight.
| 40HC at 18 mm, 1220 × 2440 mm | Packs | Sheets | Volume | Weight per sheet |
|---|---|---|---|---|
| Styrax core | 18 × 55 sheets | 990 sheets | about 53 m³ | 26.8 kg |
| Acacia core | 16 × 55 sheets | 880 sheets | about 47 m³ | 31.1 kg |
| Eucalyptus core | 15 × 53 sheets | 795 sheets | about 43 m³ | 34.8 kg |
Reference densities: Styrax 500, Acacia 580, Eucalyptus 650 kg/m³; planning payload 28,000 kg unless the booking is lower.
A 1250 × 2500 mm sheet has about 5 % more area than a 1220 × 2440 mm sheet, so each sheet weighs about 5 % more and the pack plan is drawn for that size. Our packing calculator works out sheets and weight for any size, and our container loading page shows how packs are stowed.

How long does plywood take to ship from Vietnam by market?
Transit time from Vietnam depends on the destination region more than on the sheet size. Typical days at sea from Hai Phong, by carrier and route:
| Destination region | Typical days at sea |
|---|---|
| South-East Asia (Singapore, Malaysia, Indonesia) | 5–12 days |
| Middle East (UAE, Saudi Arabia) | 15–25 days |
| US West Coast | 20–30 days |
| Mediterranean | 25–35 days |
| Northern Europe (Sweden, Germany, UK) | 30–40 days |
| US East Coast | 35–45 days |
| West Africa | 35–50 days |
| Japan and Korea | about 2–3 weeks |
Production is 15–45 days after the deposit, so a buyer planning stock adds the production time, the sailing time and port handling at both ends.
What sizes does Minh Thanh Plywood make?
We press 1220 × 2440 mm and 1250 × 2500 mm sheets, plus custom sizes such as 1220 × 2500 and 1220 × 2280 mm, in thicknesses from 3 to 40 mm. That covers the full sheet of every market in this guide that buys the 4 × 8 ft format and the European metric sheet.
| What you need | What we supply |
|---|---|
| 8 × 4 ft sheet (South Africa, India, UAE, Canada, Asia) | 1220 × 2440 mm |
| European metric sheet | 1250 × 2500 mm |
| Custom length or width | Custom sizes such as 1220 × 2500 and 1220 × 2280 mm |
| Small panels and parts | Cut-to-size: one panel cut into 4, 6 or 8 pieces |
| Local thickness set | Any thickness from 3 to 40 mm |
| Mixed sizes in one container | Mixed loads by agreement |
Cut-to-size panels ship regularly to Italy and other European markets. Our cut-to-size plywood page shows the cutting options, and our plywood sheet sizes guide explains the formats in more depth.
Can you produce custom plywood sizes?
Yes. Custom sizes such as 1220 × 2500 and 1220 × 2280 mm are made to order, and cut-to-size orders split one panel into 4, 6 or 8 pieces. Send the finished sizes and quantities, and the cutting plan is matched to the nearest sheet.
Half sheets and cut panels: buying smaller sizes
Merchants in every market sell half sheets and cut panels. Importers rarely do. A container is priced by the cubic metre, and cutting at the destination costs labour and space.
There are two better routes for small parts:
- Order cut-to-size from the mill. We cut one panel into 4, 6 or 8 pieces. The parts arrive packed and counted.
- Order the standard sheet and cut locally. This suits a buyer with a panel saw and many different parts.
A half sheet of 1220 × 2440 mm is 1220 × 1220 mm. A quarter is 610 × 1220 mm. Ask for parts in exact millimetres, with the tolerance, and say which edge carries the grain.
How to write the size line on a plywood order
Write the sheet size in millimetres, the foot size if your market uses it, the thickness and both tolerances on the same line. That one line prevents most size disputes between markets.
- Size in mm, width first: 1220 × 2440 mm, not “4 × 8” alone.
- Foot size in brackets for markets that think in feet: (8 × 4 ft).
- Thickness in your market’s step: 18 mm for Europe and South Africa, 19 mm for India, 18.5 mm for a Canadian label.
- Thickness tolerance: for example ±0.2 mm for sanded furniture panels.
- Length and width tolerance: ±2 mm.
- Face, core, glue and emission: for example poplar A/B, Styrax core, UF glue at E0 emission.
- Packing and destination port, so the pack plan and sailing are quoted together.
A ready line reads: Furniture plywood, 1220 × 2440 mm (8 × 4 ft) × 18 mm, ±0.2 mm thickness, ±2 mm length and width, Styrax core, poplar face/back A/B, UF glue at E0 emission, packed on full bases, CIF Durban. Send it through our cut-to-size plywood page with your quantity, and we will reply within hours with a quotation and free samples. MOQ is one 40HC, with mixed specifications by agreement.
Buyer questions, answered
What are the standard sizes of plywood in South Africa?
The standard full plywood sheet in South Africa is 1220 × 2440 mm, sold as 8 × 4 ft. Merchants stock it from about 3 to 21 mm thick, with 18 and 21 mm shutterply for concrete formwork.
What sizes of plywood are available in South Africa?
Full sheets of 1220 × 2440 mm in pine, hardwood-faced, marine, film-faced and shutterply grades, in thicknesses from about 3 mm to 21 mm and more. Half sheets and cut panels are sold by merchants with cutting services.
What is the standard plywood size in India?
India buys 8 × 4 ft sheets, made in metric as 1220 × 2440 mm, and also 7 × 4, 6 × 4, 8 × 3, 7 × 3 and 6 × 3 ft sheets. Common thicknesses run 4, 6, 9, 12, 16, 19 and 25 mm.
What is the plywood size in the UAE?
The UAE uses the 8 × 4 ft sheet, quoted as 2440 × 1220 mm, in thicknesses from about 3 mm to 25 mm. Film-faced plywood for formwork is mostly 18 mm in the same sheet size.
What are standard plywood thicknesses in Canada?
Canadian softwood plywood is sold in metric thicknesses such as 9.5, 12.5, 15.5 and 18.5 mm, which correspond to the nominal 3/8, 1/2, 5/8 and 3/4 inch panels, on the 4 × 8 ft sheet.
Where is plywood 900x2500 used?
The 900 × 2500 mm format is a Swedish construction plywood size, sold by merchants in spruce at 12 and 15 mm for walls and floors. It is a narrow sheet that one person can carry and fix.
Can you produce custom plywood sizes?
Yes. Besides 1220 × 2440 and 1250 × 2500 mm we make custom sizes such as 1220 × 2500 and 1220 × 2280 mm, and cut one panel into 4, 6 or 8 pieces for cut-to-size orders.
Can I get custom ply board sizes in the UAE?
Yes. Merchants cut standard 8 × 4 ft sheets to size, and importers can order cut-to-size panels from the mill by the container, which saves cutting and waste on site.
What is the best plywood for kitchens and bathrooms in the UAE?
Use plywood with a water-resistant bond, such as melamine-fortified or phenolic (WBP) glue, sealed on all faces and edges. A moisture-resistant bond matters more than thickness in wet rooms.
Is 2440 x 1220 the same as 1220 x 2440 plywood?
Yes. Both describe the same 8 × 4 ft sheet. South African and Gulf merchants write the length first; mills and cutting software often write the width first.
What size is a half sheet of plywood?
A half sheet of a 1220 × 2440 mm panel is 1220 × 1220 mm. A quarter sheet is 610 × 1220 mm.
Is plywood 1500 x 2400 a standard size?
It is a wide format sold mainly by Nordic merchants for floors and walls. Most export furniture plywood is pressed as 1220 × 2440 or 1250 × 2500 mm, and wide parts are ordered cut-to-size.
How long does plywood take to ship from Vietnam to the UAE?
Typical days at sea from Hai Phong to the Middle East are 15–25, by carrier and route. Production is 15–45 days after the deposit.
Why are plywood sheet sizes different by country?
Sheet sizes follow building modules: 4 × 8 ft fits 16 and 24 inch stud spacing in imperial countries, while 1250 × 2500 mm fits the 625 mm metric module used in continental Europe.