CARB P2 / TSCA VI certifiedISO 9001:2015E0 tested every 3 monthsEUDR geodataPPWR testedCertificates and test resultscontact@minhthanhplywood.comWhatsApp +84 988 586 601

Importing

MDF price: what does a sheet cost in 2026, and how does it compare with plywood?

Updated
Request a Quote

In October 2026 a full 2440 × 1220 mm sheet of 18 mm standard MDF costs £28–£29.81 inc VAT at UK merchants, and moisture-resistant 18 mm costs about 60% more at £47.74. Buy on the sheet price alone and you can overpay twice: thin boards cost more per cubic metre, and heavy MDF fills a container by weight before space. This guide gives dated UK sheet prices by thickness, the price per m³ behind them, delivery thresholds, the drivers that move the price, and furniture plywood from Minh Thanh Plywood, a Vietnamese plywood manufacturer, priced on the same sheet.

Listen to the summary · 0:51
Listen to the article · 1:56
Cover of “MDF Price per Sheet in 2026: UK Rates and Plywood Compared”: 0.0535824 m³ in an 18 mm sheet; 37.5 vs 26.8 kg MDF vs Styrax plywood; 40 vs 53 m³ per 40HC, MDF vs plywood; US$350/m³ furniture plywood, from
Why MDF quotes differ · 1:56

MDF price: what are you paying for?

MDF price pays for wood fibre, resin, energy and pressing at the board plant, then freight and each seller’s margin to you. Medium density fibreboard is made by breaking wood into fibres, mixing them with resin and pressing them into a flat, even board, so its cost follows fibre, resin and energy more closely than plywood’s does.

Three ways the same MDF board is quoted:

Unit Who quotes it Use
Per cubic metre Board plants, exporters, importers Comparing thicknesses and suppliers
Per sheet Merchants, distributors Buying a known size and thickness
Per square metre Some distributors and panel processors Surfaced boards and cut parts

Plywood is quoted the same three ways, which makes the two easy to compare once both are on the same unit and the same delivery term.

How much does a sheet of MDF cost in the UK in 2026?

A full 2440 × 1220 mm sheet of standard MDF costs £14.52–£29.81 inc VAT at UK merchants in October 2026, from 6 mm to 18 mm; moisture-resistant 18 mm costs £47.74. The prices below are the shelf prices of two UK merchants, read on 21 October 2026.

MDF, 2440 × 1220 mm Robert Price, inc VAT Robert Price, ex VAT Price per m³, ex VAT Wickes, from
6 mm standard £14.52 £12.10 about £677/m³ £18
9 mm standard £19.62 £16.35 about £610/m³ £20
12 mm standard £23.11 £19.26 about £539/m³ £23
18 mm standard £29.81 £24.84 about £464/m³ £28
18 mm moisture-resistant £47.74 £39.78 about £742/m³ n/a

Three things the table shows a buyer:

  1. Thin boards cost more per cubic metre. 6 mm MDF costs about £677/m³ ex VAT against about £464/m³ for 18 mm, because pressing, sanding and handling cost about the same per sheet whatever the thickness.
  2. Moisture-resistant MDF carries about a 60% premium over standard board of the same thickness (£39.78 against £24.84 ex VAT at 18 mm).
  3. Delivery changes the sheet price. B&Q charges £35 for home delivery of full sheets with a £100 minimum order. Cut My cuts MDF to size from 3 mm to 25 mm with free delivery over £250 and next-working-day dispatch on orders placed before 1pm.
UK seller What it sells Best for
B&Q Full and half sheets, 6–18 mm standard and moisture-resistant, click and collect One-off DIY jobs
Wickes General-purpose sheets 6–18 mm, half and part sheets, beaded panels Trade and DIY near a branch
Robert Price Full 2440 × 1220 mm sheets, standard and moisture-resistant, prices shown ex VAT Builders comparing net prices
Cut My CNC cut-to-size MDF, 3–25 mm, primed option Exact parts without a saw
Selco, Savoy Timber, PGR Timber, MDF Direct Trade sheet materials in pack quantities Contractors and joiners

A furniture plant buying by the container sits below all of these. For comparison, our furniture plywood starts from US$350/m³, which is about US$18.75 for an 18 mm sheet of 1220 × 2440 mm as a raw FOB example before freight and duty (October 2026).

UK MDF ex-VAT prices per cubic metre: £677 at 6 mm, £610 at 9 mm, £539 at 12 mm, £464 at 18 mm, £742 moisture-resistant

What drives MDF board price?

MDF board price is driven by eight things: density, thickness, glue and emission class, moisture or fire grade, surface, sheet size, quantity and freight. Two boards both sold as “18 mm MDF” can differ on several of them.

Driver Lower price Higher price
Density Light MDF for low-load parts High-density boards for routing and fixings
Thickness Volume thicknesses in stock Thin boards and very thick boards
Glue and emission class Standard urea-formaldehyde, E1 Low-emission and no-added-formaldehyde boards, CARB P2 / TSCA Title VI
Moisture or fire grade Standard interior Moisture-resistant or fire-retardant grades
Surface Raw board Melamine-faced, veneered, primed or lacquered
Sheet size Standard sizes Long and wide formats, cut-to-size
Quantity Full container, one specification Single sheets, mixed small orders
Freight Short haul, light load Long sea routes; heavy boards fill a container by weight

The last driver catches many buyers out. MDF is heavier than most plywood, so a container of MDF often reaches its weight limit before its volume limit, and the freight per cubic metre rises.

How do you convert medium density fibreboard price between sheet, m² and m³?

Convert medium density fibreboard price by multiplying the cubic-metre rate by the sheet volume, or dividing a sheet price by the sheet area. Keep thickness beside every area price, because a square metre of 18 mm board holds 50% more material than a square metre of 12 mm.

Sheet Area Volume Sheet price from a m³ rate R
1220 × 2440 × 12 mm 2.9768 m² 0.0357216 m³ R × 0.0357216; at £539/m³, £19.26 ex VAT
1220 × 2440 × 18 mm 2.9768 m² 0.0535824 m³ R × 0.0535824; at £464/m³, £24.84 ex VAT
1250 × 2500 × 18 mm 3.125 m² 0.05625 m³ R × 0.05625

The same factors work for plywood. At our furniture plywood starting price of US$350/m³, an 18 mm sheet of 1220 × 2440 mm starts from about US$18.75 ex-mill; at the commercial starting price of US$250/m³, about US$13.40 (October 2026). Put an MDF quote on the same basis and the comparison is fair.

MDF sheet price conversion: 1220 × 2440 × 18 mm is 0.0535824 m³ and £24.84 at £464 per m³

Why does the MDF price differ at the factory, the importer and the shop?

The MDF price differs by channel because each hand adds freight, storage, credit and margin. A factory quotes FOB or CIF per cubic metre by the container; an importer quotes delivered per sheet or per pack; a shop prices per sheet with cutting and service included.

Channel Price basis What sits in the price
Board plant or exporter FOB or CIF per m³, one container minimum Board cost and the plant’s margin
Importer or distributor Per sheet or per m³, delivered Freight, duty, port, storage, credit, margin
Merchant or DIY store Per sheet, cut and collected or delivered All of the above plus shelf stock and cutting

A retail sheet price is the right number for a homeowner and the wrong one for a factory planning a container. The UK figures above show the spread: an 18 mm sheet at £24.84 ex VAT on the merchant’s shelf already carries freight, duty, stock and margin. Compare like with like: the same board, the same unit and the same delivery term.

How does MDF price compare with plywood for the same sheet?

Per sheet, raw MDF usually costs less than furniture plywood of the same thickness, but per container the gap narrows because MDF is heavier. The table sets an 18 mm MDF sheet beside our plywood on the same 1220 × 2440 mm size and the same 40HC.

Point, 18 mm × 1220 × 2440 mm MDF, assumed 700 kg/m³ Furniture plywood, Styrax core Commercial plywood, eucalyptus core
Weight per sheet about 37.5 kg 26.8 kg 34.8 kg
Sheets per 40HC at most about 746, weight-capped 990 795
Cubic metres per 40HC at most about 40 m³ about 53 m³ about 43 m³
Price basis Board plant’s quote From US$350/m³ From US$250/m³
Edge Even fibre, needs sealing Cross-laid veneers, visible edge possible Cross-laid veneers

The MDF figures use the 28,000 kg planning payload before packing weight, so a real MDF load is a little lower. The same freight spreads over about a third more cubic metres of Styrax-core plywood than of MDF, which closes part of the price gap on long sea routes.

MDF price and plywood compared for an 18 mm sheet: weight, sheets and cubic metres per 40HC

Is MDF heavier than plywood, and what does that do to the price?

MDF is usually heavier than plywood of the same thickness, and that raises its delivered price per cubic metre. At an assumed 700 kg/m³, an 18 mm MDF sheet weighs about 37.5 kg; the same sheet in Styrax-core plywood weighs 26.8 kg and in eucalyptus-core plywood 34.8 kg.

Weight changes the price in three places:

  1. Sea freight: a container rate is paid per box, and a heavy board fills the payload before the space, so fewer cubic metres share the rate.
  2. Inland haulage: trucks are weight-limited too, so delivered prices per sheet rise with board weight.
  3. Handling: heavier sheets need two people or a lift in the workshop and on site.

For buyers who ship furniture, weight follows the product to the end customer. A wardrobe made of Styrax-core plywood weighs less than the same wardrobe in MDF, which lowers the freight on the finished goods as well.

Is plywood stronger than MDF, and is the price difference worth it?

Plywood is stronger than MDF for spans, screw holding and edges, because its veneers are laid across each other and carry load in both directions. MDF is better where an even, paintable face and clean routing matter more than strength, such as painted doors.

Use Better choice Why
Painted, routed cabinet doors MDF Even fibre face and edge, no grain
Cabinet carcasses with screws and hinges Plywood Screws hold in face and edge
Shelves with long spans Plywood Less sag under load
Visible edge in design furniture Plywood Layered edge is part of the look
Weight-sensitive furniture and transport Plywood on a light core Lighter per sheet
Humid rooms Plywood with MR or WBP glue, or moisture-resistant MDF The bond or resin grade decides

Where plywood’s strength lets you use a thinner panel or a lighter build, the higher sheet price can turn into a lower price per finished part. Our plywood vs MDF guide covers the choice part by part.

Decision diagram: MDF or plywood by what the part needs

Which costs less per finished part: MDF or plywood?

The cheaper board per sheet is not always the cheaper board per finished part. Count the work and waste each board brings to the part, then divide the total by the parts you can sell.

What to add to each board’s sheet price:

  • Edges: MDF edges need sealing before paint or banding before use; a plywood edge can be left visible on furniture-grade panels.
  • Fixings: MDF needs pilot holes and suitable screws, and edge fixings near corners are weaker; plywood takes screws in the face and the edge.
  • Supports: long MDF shelves need closer supports or a thicker board.
  • Finishing: MDF takes paint with less preparation; plywood takes clear finishes, veneer and lacquer on its own face.
  • Rejects: count damaged corners in transport and in the workshop; dense MDF corners crush under impact.
  • Freight on the finished product: heavier parts cost more to ship.

Run a trial with both boards on the same drawing and the same acceptance rule. The board that gives the lowest cost per accepted part wins, whatever its sheet price.

Five cost branches beyond MDF and plywood sheet prices: edges, fixings, supports, finishing, waste and freight

What do emission class and moisture grade add to the MDF price?

Emission class and moisture grade add cost because they need different resins and more control at the board plant. Low-emission and moisture-resistant boards cost more than standard interior MDF of the same thickness.

  • Emission class: standard MDF uses urea-formaldehyde resin. Lower-emission and no-added-formaldehyde boards cost more. In the US, MDF sold must meet the limit of 0.11 ppm under 40 CFR 770.10.
  • EU limit: from 6 August 2026, Regulation (EU) 2023/1464 limits formaldehyde released by furniture and wood-based articles placed on the EU market to 0.062 mg/m³ under the EU test method.
  • Moisture-resistant MDF: a different resin system for humid interiors; at UK merchants in October 2026 it costs about 60% more than standard board of the same thickness, and is usually coloured green for identification.
  • Fire-retardant MDF: treated boards for public buildings, priced higher again.

Plywood has the same split. Our furniture panels use UF glue at E0 emission and carry CARB P2 / TSCA Title VI certification (ICTT mill no. 23024); six ASTM D6007 chamber tests between April 2025 and June 2026 averaged 0.014–0.032 ppm against the 0.05 ppm limit for hardwood plywood. Humid and exterior builds use MR or phenolic (WBP) glue to your specification.

What moves MDF prices from year to year?

MDF prices move with wood fibre, resin, energy and freight, the four costs that make up most of a board’s price. When one of them rises, board plants pass it on in their next price lists.

Cost Why it matters for MDF
Wood fibre Plantation and sawmill residues are the raw material; supply follows harvesting and the sawmill trade
Resin Urea and melamine resins follow gas and chemical prices; low-emission resins cost more
Energy Fibre refining, drying and pressing use a lot of heat and power
Freight MDF is heavy, so sea and road rates move delivered prices more than for lighter panels
Rules Emission limits and origin rules, such as the EU Deforestation Regulation, add testing and paperwork

Plywood shares the wood and freight costs but uses less resin per cubic metre than MDF and has no fibre refining step. That is one reason plywood and MDF prices do not always move together.

How do you compare MDF and plywood prices in the UAE, Israel or Greece?

Compare MDF and plywood prices in any import market, including the UAE, Israel and Greece, on the same unit, the same delivery term and the same specification. Local sheet prices mix import costs, stock and margins, so set them against a delivered price per cubic metre.

  1. Ask both suppliers for a price per cubic metre on CIF or delivered terms.
  2. Match the specification: emission class, moisture grade, surface and thickness tolerance.
  3. Add the freight effect of weight: heavier MDF carries fewer cubic metres per container.
  4. Count the cost per finished part, not per sheet.
  5. Check the documents your market asks for: emission certificates and, for the EU, origin records.

From Hai Phong, typical days at sea run 15–25 to the Middle East and 25–35 to the Mediterranean, by carrier and route. Our guide to plywood suppliers in the UAE covers the Gulf market in detail.

When should a furniture buyer switch from MDF to plywood?

A furniture buyer should switch parts from MDF to plywood when strength, weight, screw holding or a visible edge matter more than the lowest sheet price. Painted doors can stay MDF; carcasses, shelves and parts shipped long distances often cost less per finished part in plywood.

What we offer buyers comparing the two:

Point Minh Thanh Plywood
Panels Furniture and interior plywood with birch, poplar, EV, okoume, pine and eucalyptus faces; commercial and packing plywood; LVL
Build White Styrax or eucalyptus core, stitched core layers, pressed twice, sanded faces, both faces UV-ready
Tolerance ±0.2–0.3 mm on sanded furniture panels
Emission UF glue at E0 emission; CARB P2 / TSCA Title VI (ICTT mill no. 23024)
Price From US$350/m³ furniture, from US$250/m³ commercial, October 2026
Capacity 50,000+ m³ per year
Order MOQ 1×40HC, mixed specifications by agreement; 15–45 days after the 30% deposit; FOB Hai Phong, CFR or CIF

Send the part list or drawing you now make in MDF through the products page, with the thickness and finish. We reply within hours with a plywood build, a price per cubic metre and free samples to trial against your MDF.

Buyer questions, answered

How much is a sheet of 18 mm MDF in the UK?

In October 2026 a 2440 × 1220 mm sheet of 18 mm standard MDF is £28 at Wickes and £29.81 inc VAT (£24.84 ex VAT) at Robert Price. Moisture-resistant 18 mm is £47.74 inc VAT at Robert Price.

What is the MDF price per m³ in the UK?

At Robert Price's October 2026 shelf prices ex VAT, 18 mm standard MDF works out at about £464/m³, 12 mm at about £539/m³, 6 mm at about £677/m³ and 18 mm moisture-resistant at about £742/m³. Thin boards cost more per cubic metre.

What determines the price of MDF?

Density, thickness, glue and emission class, moisture or fire grade, surface (raw, melamine, veneer), sheet size, quantity and freight. The seller's channel adds its own margin on top.

How do I convert an MDF price per m³ to a price per sheet?

Multiply the price per cubic metre by the sheet volume in cubic metres. A 1220 × 2440 × 18 mm sheet holds 0.0535824 m³, so its price is the m³ rate times 0.0535824.

Is MDF cheaper than plywood?

Per sheet, raw MDF usually costs less than furniture-grade plywood of the same thickness. Per finished part the gap narrows, because MDF needs edge treatment, more support and more care with screws.

Is MDF heavier than plywood?

Usually, yes. At an assumed 700 kg/m³, an 18 mm MDF sheet of 1220 × 2440 mm weighs about 37.5 kg, against about 26.8 kg for the same sheet of Styrax-core plywood.

Is plywood stronger than MDF?

For screw holding, spans and edge strength, yes. Plywood's cross-laid veneers carry load and hold screws in the edge better, while MDF's even fibre face is better for painted, routed doors.

Does moisture-resistant MDF cost more?

Yes. At Robert Price in October 2026, 18 mm moisture-resistant MDF is £47.74 inc VAT against £29.81 for standard 18 mm, about 60% more. Specify it only where the part is exposed to humidity.

What does plywood cost from Minh Thanh Plywood?

From US$350/m³ for furniture plywood and from US$250/m³ for commercial plywood (October 2026). That is about US$18.75 and US$13.40 for an 18 mm sheet of 1220 × 2440 mm ex-mill.

Does Minh Thanh Plywood sell MDF?

No. We manufacture plywood and also supply LVL. This guide compares MDF prices with plywood for buyers deciding between the two for furniture and interiors.

What is the MDF vs plywood price in the UAE?

In the UAE, as in most import markets, raw MDF sells for less per sheet than furniture plywood of the same thickness. Compare both per cubic metre on the same delivery term, and add the freight effect of MDF's higher weight.

Related buying guides

Work with Minh Thanh Plywood

Ready to put the specification into an order?

Send your application, destination and requirements.

Request a Quote

Contact us

Get a quote