Phu Tho province in northern Vietnam is one of the country's plywood-making regions, home to veneer peeling yards, core board plants, commercial and film-faced mills and a smaller number of furniture-grade plywood factories. Minh Thanh Plywood, in Ha Hoa, Phu Tho, is one of them; this guide uses it as the worked example of what a Phu Tho mill makes and how to check one.
Which plywood factories are located in Phu Tho province in Vietnam
Phu Tho province has plywood factories of every kind: many small veneer peeling yards and core board plants, mills that press commercial, packing and film-faced plywood, and a smaller number of factories that make furniture-grade export plywood. Minh Thanh Plywood, in Ha Hoa, Phu Tho, is one of the furniture-grade factories, with Europe as its main market.
Most mills in the province are not export brands. They peel plantation logs into core veneer, or press it into core boards, and sell to larger mills. A buyer looking for a factory to supply finished, certified panels is looking at the smaller group at the top of the chain: mills that build, press, sand and pack their own panels and hold their own certificates.
The table and list below name the plywood factories and where they sit; the rest of the guide explains how to tell them apart.
Where the plywood mills of Phu Tho are
| Area | Mills found there | Examples named in public listings |
|---|---|---|
| Ha Hoa (north-west Phu Tho) | Furniture-grade and commercial mills among the Acacia, Eucalyptus and Styrax plantations | Minh Thanh Plywood, plus another producer that describes three plywood facilities in Phu Tho |
| Thuy Van industrial zone, Viet Tri | Finished-panel and cabinet exporters near the provincial city | Junma Phu Tho Co., Ltd (Lot 10, Thuy Van IZ) |
| Thanh Son | Packing plywood, LVL and film-faced plywood | Son Hung Joint Stock Company (packing plywood); Phuong Hy (LVL and film-faced plywood) |
| Yen Lap | Core veneer and plywood | Thuan Phat Industrial Wood (head office in Hanoi) |
| Tam Duong and the former Vinh Phuc area | Groups of northern mills selling through one trading name | Tadex Ply, which describes itself as a group of six plywood manufacturers in northern Vietnam |
Each of these is a company’s own description or a public listing, so verify a registration and export history before relying on one. Dozens of smaller peeling yards and core board plants sit between them and sell veneer to the finished-panel mills.
Export plywood factories in Phu Tho
- Minh Thanh Plywood, Ha Hoa: a furniture-grade manufacturer with a capacity of 50,000+ m³ a year, Europe as its main market, CARB P2 / TSCA Title VI certification for the US, and terms FOB Hai Phong, CFR or CIF.
- Junma Phu Tho Co., Ltd, Viet Tri: a shipper whose US import record on ImportInfo shows 1,804 bills of lading between May 2018 and January 2026, for kitchen cabinets and plywood with a white birch face and an Acacia or Eucalyptus core. The leading US ports in that record are Houston with 629 bills, Newark with 198 and Los Angeles with 186.
- Tadex Ply: a trading group of northern Vietnamese plywood mills with an address in Phu Tho.
- Phuong Hy: a maker with a Thanh Son factory for LVL and film-faced plywood.
- Thuan Phat Industrial Wood: a company whose listed factory is in Yen Lap and whose products include Acacia and Eucalyptus core veneer and plywood.
A shipping-record page is the one public check on what a Phu Tho mill really exports. Compare the product lines, ports and consignees in it with what the mill tells you.
Where Phu Tho is, and what changed in 2025
Phu Tho is a province in Vietnam’s northern midlands, north-west of Hanoi, where low hills are planted with Acacia, Eucalyptus and Styrax for wood. Ha Hoa lies in the north-west of the province, among those plantations.
Vietnam reorganised its provinces on 1 July 2025: Phu Tho was merged with Vinh Phuc and Hoa Binh into a larger Phu Tho province, and the district level of administration was abolished. Addresses are now written at commune and province level. A mill that wrote “Ha Hoa district, Phu Tho” before now writes “Ha Hoa, Phu Tho, Vietnam”, as Minh Thanh does.
For a buyer this matters in two places: matching an address on a certificate or business document to the mill you visit, and reading EUDR geolocation files, where the plots are given as coordinates rather than district names.
Why plywood mills cluster in Phu Tho
Plywood mills cluster in Phu Tho because the timber for their cores grows around them and the area has a skilled, experienced workforce. Short haulage from plantation to lathe keeps core costs down, and the core is most of a plywood panel.
Three things come together in the region:
- Plantation timber within trucking range. Acacia and Eucalyptus are grown widely across the hills; Styrax, the light white core wood, grows only in northern Vietnam.
- A peeling and pressing trade. Veneer peeling yards, core board plants and finished-panel mills sit close together, so veneer moves between them quickly.
- Skilled labour. Grading, jointing and laying up veneer is hand work that improves with practice; the region has done it for a generation.
For a Ha Hoa mill, these add up to a price advantage. Minh Thanh can make high-grade furniture panels at a better price than comparable mills, because the core timber is local and the workforce is skilled.
The kinds of plywood mills you will find in Phu Tho
Phu Tho plywood mills fall into five kinds, from yards that only peel veneer to factories that ship finished, certified panels to Europe and the US. Knowing which kind you are talking to tells you what it can supply.
| Kind of mill | What it makes | Sells to | Fit for an export buyer |
|---|---|---|---|
| Veneer peeling yard | Rotary peeled core veneer | Other mills | No; raw material only |
| Core board plant | Pressed core boards, unfaced | Other mills | No; a part of a panel |
| Commercial and packing mill | Commercial and packing plywood, often unsanded | Domestic and export traders, packing plants | For packing and utility grades |
| Film-faced mill | Film-faced and anti-slip plywood on Acacia or Eucalyptus cores | Construction buyers | For formwork |
| Furniture-grade mill | Sanded, calibrated furniture and interior plywood, certified | Furniture, cabinet and interior plants, importers | For furniture, cabinets, interiors |
Each kind serves a segment. Furniture-grade mills use A-grade Styrax or Eucalyptus cores, stitched layers, E0 or E1 emission, always-sanded faces and a full set of certificates. Commercial and packing mills use looser AB cores and lighter sanding. Film-faced mills build on hard Acacia or Eucalyptus cores.
The most common importer mistake is comparing two offers with the same product name from mills in different segments. The two offers are not the same construction: the difference comes from core grade, joining method, face preparation, adhesive system and tolerance.

The timber that goes into a Phu Tho plywood core
Phu Tho plywood cores are peeled from three plantation species, Styrax, Eucalyptus and Acacia, and the core species decides a panel’s weight, colour and use. Minh Thanh uses white Styrax or Eucalyptus cores as standard for furniture panels, with Acacia and Pine cores made on order.
| Core | Reference density | 18 mm sheet, 1220 × 2440 mm | What it suits |
|---|---|---|---|
| Styrax | 500 kg/m³ | 26.8 kg | Light, pale furniture panels; most m³ per container |
| Acacia | 580 kg/m³ | 31.1 kg | Firm general panels, film-faced cores |
| Eucalyptus | 650 kg/m³ | 34.8 kg | Hard, dense furniture and film-faced panels |
Many European furniture buyers choose Styrax for its light weight and clean, white core. Buyers who want a heavier, harder panel choose Eucalyptus. There is no poplar or birch core from Vietnam: those species reach a Vietnamese panel only as face veneers, and imported birch and okoume faces are pressed on a Vietnamese core.
Veneers and finished panels at Minh Thanh are dried to 8–12 % moisture content at dispatch, the normal range for furniture plywood.

Minh Thanh Plywood: a Phu Tho mill as a worked example
Minh Thanh Plywood is a Vietnamese plywood manufacturer in Ha Hoa, Phu Tho, built for top-grade furniture and interior plywood with Europe as its main market, and with over 20 years of plywood-making experience. It also produces commercial, packing and film-faced plywood. Capacity is 50,000+ m³ per year.
| What | Minh Thanh, Ha Hoa |
|---|---|
| Main products | Furniture and interior plywood; commercial, packing and film-faced plywood |
| Faces | 10+ face veneers: EV, poplar, birch, okoume, pine most produced; bintangor, eucalyptus, gurjan, sapele on request |
| Cores | Styrax or Eucalyptus standard; Acacia and Pine on order |
| Thickness | 3–40 mm |
| Sizes | 1220 × 2440 mm and 1250 × 2500 mm; custom such as 1220 × 2500 mm and 1220 × 2280 mm |
| Build | Core stitched horizontally and vertically; furniture panels pressed twice |
| Tolerance | Sanded furniture panels ±0.2–0.3 mm, down to ±0.2 mm |
| Glue | UF glue at E0 emission standard; MR and phenolic (WBP) to specification |
| Surface | Sanded and polished, both faces UV-ready |
| Cut-to-size | One panel cut into 4, 6 or 8 pieces |
Double pressing is the build step that sets a furniture-grade mill apart: the core board is pressed and calibrated first, then face and back are pressed on. It gives the flat panel and the even thickness that furniture and cabinet plants need. See how Minh Thanh makes plywood and the factory in Ha Hoa.
How to tell a Phu Tho manufacturer from a trading desk
A Phu Tho manufacturer can show you its own presses, its own certificates in its own name and its own production on a live call; a trading desk can show you finished panels and someone else’s documents. Four checks settle it:
- Certificate holder. A CARB P2 / TSCA Title VI certificate names the mill and its mill number. Minh Thanh’s is ICTT mill no. 23024.
- The floor on camera. Ask for a live video call that walks from the log yard to the press and the sander; a mill can do it on the day.
- Test reports. Chamber test reports name the panels and the laboratory. Minh Thanh’s six ASTM D6007 reports are from Shanghai Hongjun and ICTT Vietnam.
- Shipment records. A mill photographs and films each shipment before loading and sends the buyer the photos and video.
The sibling guide on telling a plywood factory from a trading company goes further, with questions to ask before the first order.
From Phu Tho to Hai Phong port
Phu Tho plywood ships from Hai Phong, northern Vietnam’s main container port: panels are trucked from the mill to Hai Phong and loaded for sea. Minh Thanh sells FOB Hai Phong, CFR or CIF.
Typical days at sea from Hai Phong, by carrier and route:
| Destination | Days at sea |
|---|---|
| South-East Asia | 5–12 days |
| Japan and Korea | about 2–3 weeks |
| Middle East | 15–25 days |
| US West Coast | 20–30 days |
| Mediterranean | 25–35 days |
| Northern Europe | 30–40 days |
| US East Coast | 35–45 days |
| West Africa | 35–50 days |
Container load depends on the core. On 1220 × 2440 mm sheets at 18 mm, a 40HC holds 990 sheets on Styrax (18 packs), 880 on Acacia (16 packs) and 795 on Eucalyptus (15 packs), with a 28,000 kg planning payload unless the booking is lower. The container loading page shows how the packs are placed.

Vietnam vs China plywood: how a Phu Tho mill compares
A Phu Tho mill competes on plantation hardwood cores, furniture-grade builds and the documents European and US buyers ask for, while Chinese mills are known for poplar cores and a very wide product range. Both countries make good and poor panels; the build and the documents decide, not the flag.
| What buyers compare | Phu Tho furniture-grade mill | What to ask any mill |
|---|---|---|
| Core species | Styrax, Eucalyptus, Acacia; no poplar core | Name the core species on the quote |
| Build | Stitched core, double pressed, calibrated | Ask how the core is joined and pressed |
| Tolerance | ±0.2–0.3 mm sanded furniture panels | Ask for the tolerance by product line |
| Emission proof | CARB P2 / TSCA Title VI, chamber tests | Ask for the certificate and the test reports |
| EU timber rules | EUDR compliance dossier; Vietnam rated low risk | Ask what origin files come with each order |
| Lead time | 15–45 days after deposit | Ask for production and sailing separately |
Vietnam is listed as a low-risk country under the EU Deforestation Regulation in Implementing Regulation (EU) 2025/1093 (checked 20 October 2026). Importers still run due diligence, and Minh Thanh supplies the EUDR compliance dossier, with origin records and geolocation files, with orders.
Certificates to ask a Phu Tho plywood mill for
Ask a Phu Tho furniture plywood mill for its emission certificate, its quality management certificate, its national product certificate, chamber test reports and its EUDR origin files. Minh Thanh’s set, with numbers:
| Document | Minh Thanh |
|---|---|
| CARB P2 / TSCA Title VI | Held, ICTT mill no. 23024, hardwood plywood veneer core, 3–50 mm |
| ISO 9001:2015 | Held, KAC25/0185 |
| TCVN 11902:2017, veneer-faced plywood | Held, VietCert |
| Chamber tests | Six ASTM D6007 tests, April 2025 – June 2026, 9, 15 and 18 mm panels, 0.014–0.032 ppm against the 0.05 ppm limit |
| Packaging (PPWR) | SGS, September 2026: lead, cadmium, mercury and hexavalent chromium not detected in all four packaging materials; pass against the 100 mg/kg limit |
| EUDR | Compliance dossier with origin records and geolocation files, supplied with orders |
| FSC, CE | Available* |
*Supplied directly or through qualified partner mills.
US orders carry the TSCA Title VI label, and the invoice and B/L state TSCA Title VI compliance; the US EPA’s formaldehyde standards for composite wood products set the rule (checked 20 October 2026). Third-party testing to a European buyer’s method, such as EN 717-1, is arranged through SGS on request. The quality page shows the certificates.
What furniture plywood from Phu Tho costs
Furniture and interior plywood from a Phu Tho mill starts from US$350/m³ and commercial plywood from US$250/m³, as indicative starting prices in October 2026. The final price depends on face, core, glue, thickness, size, quantity and delivery term.
What moves the price, in order:
- Face veneer. Imported birch and okoume faces cost more than plantation faces; EV sits between.
- Core and build. An A-grade, stitched, double-pressed core costs more than a loose AB core.
- Glue and emission. Melamine-fortified and phenolic bonds cost more than UF glue at E0 emission.
- Thickness and size. Thin panels and custom sizes take more work per cubic metre.
- Delivery term. CIF adds freight and insurance to the FOB Hai Phong price.
A buyer who switches from an Acacia core to a Styrax core can get a better face, a lighter panel and more cubic metres per container at the same build, which often lowers the landed cost per cubic metre.
Order terms and lead times
Minh Thanh’s MOQ is one 40HC, production takes 15–45 days after the 30% deposit, and the 70% balance is paid against the scanned B/L or by irrevocable L/C at sight. These are the standard terms for a Phu Tho export mill.
| Term | Minh Thanh |
|---|---|
| MOQ | 1×40HC, mixed specifications by agreement |
| Production | 15–45 days after the 30% deposit |
| Payment | 30% deposit, 70% against the scanned B/L; or irrevocable L/C at sight |
| Delivery terms | FOB Hai Phong, CFR or CIF |
| Samples | Free samples |
| Documents per shipment | Commercial invoice, packing list, B/L, certificate of origin (EUR.1 for the EU), phytosanitary and fumigation certificates, insurance with CIF |
Production time is counted from the deposit, not to the sailing date. Add the trucking to Hai Phong, the vessel schedule and the days at sea to plan arrival.

Which markets Phu Tho plywood suits
Furniture-grade plywood from Phu Tho suits European furniture, cabinet and interior buyers first, and also buyers in the Americas, Asia and Africa. Europe is Minh Thanh’s strongest market, with regular shipments to European buyers and repeat orders into Italy.
| Market | What buyers there ask for | Phu Tho build that fits |
|---|---|---|
| Europe | Light white core, good face, tight tolerance, low emission, traceability | Styrax core, double pressed, ±0.2 mm, EUDR dossier, cut-to-size |
| United States | CARB P2 / TSCA Title VI scope, labels | Certified panels, TSCA label on each panel |
| Asia | Firmer panels or a sharp price; emission named on the order | Eucalyptus core or commercial grade |
| Middle East and Africa | Furniture and construction grades | Furniture plywood or film-faced plywood |
Cut-to-size orders, where one panel is cut into 4, 6 or 8 pieces, ship regularly to Italy and other European markets.
For European buyers, the EU-Vietnam trade agreement took effect on 1 August 2020 and removes the EU’s duties on Vietnamese goods in annual steps over seven years (European Commission).
What a buyer visit to a Phu Tho mill looks like
A buyer visit to a Phu Tho plywood mill follows the panel from the log yard to the loaded container, so you see each step that decides quality. A visit to Minh Thanh in Ha Hoa runs in this order:
- Log yard. Plantation Styrax, Eucalyptus and Acacia logs, cut to block length.
- Peeling and drying. Rotary lathes peel the veneer; sheets are dried and graded.
- Core lay-up. Veneers are jointed and stitched into closed layers.
- Pressing. The core board is pressed and calibrated, then pressed again with face and back.
- Sanding and inspection. Faces are sanded and polished; thickness, flatness and grade are checked.
- Packing and loading. Packs are wrapped, strapped and labelled; shipments are photographed and filmed.
Bring your approved sample or drawing, so the faces and grades can be checked against it on the line. Buyers who cannot travel get the same walk-through on a live video call.
When a Phu Tho mill is the right source
A Phu Tho furniture-grade mill is the right source when you need sanded furniture or interior plywood on a light Styrax or hard Eucalyptus core, built to a tight tolerance and shipped with CARB P2, test reports and EUDR files. It is a less natural fit when the order is poplar-core or full-birch plywood, which Vietnam does not make.
| Your need | Phu Tho mill? |
|---|---|
| Furniture and cabinet panels, light and pale | Yes: Styrax core |
| Hard, dense panels | Yes: Eucalyptus core |
| Formwork | Yes: film-faced on Acacia or Eucalyptus |
| Cut-to-size for furniture parts | Yes: 4, 6 or 8 pieces per panel |
| Poplar-core or birch-through panels | No: Vietnam makes neither core |
| Panels larger than 1250 × 2500 mm | Outside Minh Thanh’s size range; source the required full sheet from a mill with a suitable press size |

What to send a Phu Tho mill for a quotation
Send the use, the core, the glue and emission line, the face, the size and the packing in one message, with your destination port, and a Phu Tho mill can quote the right construction the same day. Minh Thanh’s RFQ follows six questions in that order:
- Application: furniture, cabinets, interiors, packing or formwork; indoor or outdoor.
- Core: Styrax or Eucalyptus; stitched.
- Glue and emission: UF glue at E0 emission, or CARB P2 / TSCA Title VI for the US.
- Face: species, grade pair, sanded and polished, UV-ready.
- Panel: thickness, size, tolerance, cut-to-size.
- Packing and quantity: export packs, number of containers, port.
18 mm × 1220 × 2440 mm; face/back: poplar A/B, sanded and polished; core: Styrax, stitched, double pressed; UF glue at E0 emission; thickness ±0.2 mm; 1×40HC, FOB Hai Phong.
Minh Thanh sends free samples and replies within hours: contact@minhthanhplywood.com or WhatsApp +84 988 586 601.
Buyer questions, answered
Which plywood factories are located in Phu Tho province, Vietnam?
Phu Tho has many veneer peeling yards and core board plants and a smaller number of mills that press finished export plywood. Minh Thanh Plywood in Ha Hoa is a furniture and interior plywood manufacturer there, with 50,000+ m³ of yearly capacity.
Where is Ha Hoa in Phu Tho province?
Ha Hoa is in the north-west of Phu Tho province, in Vietnam's northern midlands, an area of hills planted with Acacia, Eucalyptus and Styrax. Addresses are now written at commune and province level, as Ha Hoa, Phu Tho, Vietnam.
Why are there so many plywood mills in Phu Tho?
Plantation timber for plywood cores grows around the mills, and the area has a skilled workforce. Short haulage from forest to mill keeps core costs low, which lets a Phu Tho mill offer high-grade panels at a better price than comparable mills.
Which port do Phu Tho plywood factories ship from?
Hai Phong. Panels are trucked from the mill to Hai Phong and shipped FOB Hai Phong, CFR or CIF. Typical days at sea from Hai Phong are 30–40 to Northern Europe and 20–30 to the US West Coast.
What plywood do Phu Tho mills make?
Core veneer and core boards, commercial and packing plywood, film-faced formwork plywood and furniture-grade plywood with Styrax or Eucalyptus cores. Minh Thanh makes furniture and interior plywood, and also commercial, packing and film-faced plywood.
Can I visit a plywood factory in Phu Tho?
Yes. Buyers visit Minh Thanh in Ha Hoa to see the log yard, peeling, pressing, sanding and packing, and a live video call of the floor is arranged for buyers who cannot travel.
Which certificates does a Phu Tho furniture plywood mill hold?
Minh Thanh holds CARB P2 / TSCA Title VI (ICTT mill no. 23024), ISO 9001:2015 (KAC25/0185) and TCVN 11902:2017 (VietCert), and supplies the EUDR compliance dossier with orders. FSC and CE are available*.
How much does furniture plywood from Phu Tho cost?
Indicative starting prices in October 2026 are from US$350/m³ for furniture and interior plywood and from US$250/m³ for commercial plywood. The final price depends on face, core, glue, thickness, size, quantity and delivery term.
What is the minimum order from a Phu Tho plywood mill?
At Minh Thanh the MOQ is one 40HC, with mixed specifications by agreement. Production takes 15–45 days after the 30% deposit.
Is Vietnamese plywood low risk under the EUDR?
Yes. Vietnam is listed as a low-risk country in Implementing Regulation (EU) 2025/1093. EU importers still run due diligence; Minh Thanh supplies the EUDR compliance dossier with origin records and geolocation files.