The Baltic birch plywood shortage began when the EU banned Russian wood imports in 2022 and the US suspended normal trade with Russia, raising its plywood tariff from 0–8% to 40–50%. Russia had been the main source of all-birch plywood. Buyers now use European birch at higher prices, birch-faced plywood on other cores, or other faces. Minh Thanh Plywood sets out the dated timeline and what each option means for your order.
Why is there a Baltic birch plywood shortage?
The Baltic birch plywood shortage comes from sanctions on Russia, which had been the main source of all-birch plywood. The EU banned Russian wood products in 2022, and the US raised tariffs on Russian hardwood plywood from 0–8% to 40–50%.
FSC and PEFC also suspended Russian certificates. The rest of the world’s all-birch supply could not replace those volumes at the old price.
Russia was the sixth largest plywood producer in 2021 and exported 73% of its output, according to a USITC executive briefing of June 2024. Global imports of Russian hardwood plywood fell 47% in 2023, to $674.9 million, as more than 30 countries took trade measures. The EU and the US had been Russia’s main markets.
“Baltic birch” is a trade name for all-birch plywood: birch veneer in every ply, 13 plies at 18 mm, traditionally in 1525 × 1525 mm sheets. Most of it came from Russian mills. When that supply left the EU and US markets, buyers faced three things at once: higher prices, longer lead times and less choice of thickness and size.
Birch plywood after Russia sanctions: the dated timeline
Birch plywood after Russia sanctions follows a timeline of five legal steps between 2021 and 2024. Anti-dumping duties came first, then the import bans, then measures against circumvention.
| Date | Measure | Effect on birch plywood |
|---|---|---|
| 8 November 2021 | EU Implementing Regulation (EU) 2021/1930 | Definitive anti-dumping duty on birch plywood from Russia, 15.80% for all other companies |
| March 2022 | FSC and PEFC suspend Russian certificates | No certified Russian birch for FSC or PEFC orders |
| 9 April 2022 | US suspends normal trade relations with Russia | US tariffs on Russian hardwood plywood rise from 0–8% to 40–50% |
| 9 April – 10 July 2022 | Council Regulation (EU) 2022/576 (adopted 8 April 2022) | EU bans imports of Russian wood products; deliveries under existing contracts end in July 2022 |
| 13 May 2024 | EU Implementing Regulation (EU) 2024/1287 | Anti-dumping duty extended to birch plywood consigned from Kazakhstan and Türkiye |
The legal texts are on EUR-Lex: the 2021 anti-dumping regulation, the 2022 sanctions regulation and the 2024 extension. The Commission said the 2024 extension followed Russian birch plywood being shipped through, or finished in, Kazakhstan and Türkiye (European Commission).

Is Russian plywood banned in the EU and the US?
In the EU, Russian birch plywood cannot be imported at all, and birch plywood shipped from Kazakhstan or Türkiye pays the anti-dumping duty unless the exporter holds an exemption. In the US, Russian plywood is not banned but pays column 2 tariffs of 40–50%, and US imports of Russian hardwood plywood fell 70% in 2023, to $73.7 million.
The EU has also warned importers about plywood of Russian or Belarusian origin relabelled through third-country companies (EU sanctions alert on plywood). For an importer this means the origin of the wood, not the origin of the invoice, decides whether a birch panel can enter.
Three checks follow for any birch order into Europe or the US:
- Species and country of harvest for every veneer, face, back and core, in writing.
- The producing mill, named on the invoice and the certificate of origin.
- The documents that back it: EUDR origin records and geolocation in the EU, the Lacey Act declaration data in the US.
What replaced Russian birch plywood, by market
Russian birch plywood was replaced by three kinds of panel: European all-birch from Finland, Latvia and other Baltic and Nordic mills; birch-faced plywood on other cores from China and Vietnam; and panels with other faces for painted, laminated or hidden work. Which one a buyer chose depended on the market and the use.
| Market | What replaced Russian birch | What buyers gave up |
|---|---|---|
| EU | European all-birch; birch-faced plywood from Asia; poplar and pine plywood | Low price, 1525 × 1525 mm stock in every thickness |
| US and Canada | European all-birch; birch-faced and all-birch-style plywood from Asia; domestic hardwood plywood | Low-cost “Baltic birch” for cabinets and CNC |
| China, Egypt, Türkiye, Kazakhstan | More Russian plywood at lower prices | Access to EU and US re-export markets |
The USITC briefing shows the last row clearly: in 2023, China’s import quantity of Russian hardwood plywood rose 162% and its unit value fell 21%, and imports into Türkiye and Kazakhstan rose 147% and 1,334%. That is why the EU extended its duty to Kazakhstan and Türkiye, and why a “non-Russian” birch panel needs proof of its veneer origin.
Is the Baltic birch plywood shortage over?
The Baltic birch plywood shortage is not over for all-birch plywood: supply outside Russia remains smaller, so prices stay higher and some thicknesses wait for production slots. For most uses, though, there is no shortage of panels, because birch-faced plywood and other faces fill the orders that do not need birch in every ply.
Separate the use from the habit. Many shops specified Baltic birch because it was cheap, flat and always in stock, not because the job needed birch in the core. When the price changed, three groups emerged:
- Jobs that need all-birch: exposed, unedged plies as a design feature; thin, high-load drawer sides and jigs; some laser and CNC work where the edge is seen.
- Jobs that need a birch face: cabinet doors and carcasses, painted or lacquered furniture, shelving and fixtures where the edge is banded.
- Jobs that need a flat, stable panel: laminated, veneered or painted parts where a poplar, pine or EV face works as well.
Our guide to Russian birch plywood alternatives goes through each use.

How much does Baltic birch plywood cost now, and how long does it take?
Baltic birch plywood costs more than before 2022 and takes longer to arrive. Baltic mills quoted 9 mm A/B birch plywood at about €620/m³ ex-mill in September 2025, 7% above September 2024, and lead times from Baltic mills run 8–12 weeks (Timber Insider, 2025). In US retail, a 3/4 in 4 × 8 ft BB/BB 13-ply sheet listed at $98.90 in July 2026 (Sawdust Journey, July 2026).
| Point | All-birch from Baltic and Nordic mills | Minh Thanh birch-faced plywood |
|---|---|---|
| Price reference | About €620/m³ ex-mill for 9 mm A/B (September 2025); $98.90 per 3/4 in 4 × 8 ft sheet at US retail (July 2026) | From US$350/m³ FOB Hai Phong for furniture and interior plywood (October 2026) |
| Lead time | 8–12 weeks from Baltic mills | 15–45 days after the 30% deposit |
| Availability | 5 × 5 ft sheets of 1/2 in and 3/4 in listed at $59.95 but sold out at one US dealer (July 2026) | One 40HC with mixed specifications by agreement |
| Density | 680 kg/m³ (Metsä Wood birch plywood) | 500–650 kg/m³ by core |
The price columns use different bases (ex-mill and retail against FOB export), so read them as order of magnitude, not a like-for-like quote. The practical gain for a buyer is the lead time and the freedom to choose the core: a birch-faced panel on a Styrax core weighs about 26.8 kg per 18 mm sheet, against about 36.4 kg for a 680 kg/m³ all-birch sheet of the same size (0.018 × 1.22 × 2.44 × 680), which also lowers freight cost per sheet.
Baltic birch vs Vietnamese birch-faced plywood: the specification
Baltic birch is birch in every ply; Vietnamese birch-faced plywood puts a birch face and back over a stitched Styrax or eucalyptus core. The face looks the same once sanded and finished; the edge, weight and core differ.
| Point | Baltic birch (all-birch) | Minh Thanh birch-faced plywood |
|---|---|---|
| Core | Birch veneer in every ply | White Styrax or eucalyptus; acacia and pine on order |
| 18 mm layup | 13 plies | 11–13 plies, pressed twice |
| Face grades | B, BB, CP, C | D+, D, E; D+ ≈ B, D ≈ BB, E ≈ CP/C |
| Sizes | 1525 × 1525 mm, 1220 × 2440 mm, 1250 × 2500 mm | 1220 × 2440 mm, 1250 × 2500 mm, custom |
| Thickness tolerance | By mill | Sanded ±0.2–0.3 mm, down to ±0.2 mm |
| Glue and emission | By mill | UF at E0 for furniture; melamine-fortified or phenolic WBP on order |
| Faces | Birch | Birch; also UV-ready faces for the buyer’s own coating |
| Edge | Light, even birch plies | Birch face lines over a pale core |
A birch-faced panel is the right choice when the face is seen and the edge is banded, painted or hidden. Choose all-birch where the bare edge is the design. Our birch vs Baltic birch plywood guide compares the two in detail.

Birch face grades: how D+, D and E compare with B, BB and CP
Birch face grades in Vietnam are named D+, D and E and quoted as face/back pairs such as D+/D or D/E. On the European birch ladder, an individual D+ face is about B, D about BB and E about CP/C, so D+/D is about B/BB and D/D about BB/BB.
- D+ (about B). A clean face with few small pins and colour variation; for clear-lacquered doors and visible furniture parts.
- D (about BB). Small, well-made patches and some colour change; for painted and lacquered parts and the back of D+ faces.
- E (about CP/C). More patches and open defects filled; for hidden backs, laminated or painted parts.
Every order is matched to the buyer’s approved sample, which removes the guesswork from grade names. A cabinet shop that used BB/BB Baltic birch for painted carcasses can usually order D/D birch-faced panels and keep the same finish.
Which core is best when you replace Baltic birch?
The best core to replace Baltic birch depends on what the panel must do: a white Styrax core gives a light, flat, pale panel for furniture and cabinets, and a eucalyptus core gives a heavier, harder panel with better screw holding. Acacia and pine cores are made on order.
| Core | Reference density | 18 mm sheet weight, 1220 × 2440 mm | Best for |
|---|---|---|---|
| Styrax | 500 kg/m³ | about 26.8 kg | Furniture, cabinets, light fixtures |
| Acacia | 580 kg/m³ | about 31.1 kg | Furniture parts, heavier fixtures |
| Eucalyptus | 650 kg/m³ | about 34.8 kg | Screw-holding parts, shelving, heavy use |
Core layers are stitched horizontally and vertically, and furniture panels are pressed twice: the core board is pressed and calibrated, then face and back are pressed on. That is what keeps a birch-faced panel flat and its thickness even across the sheet, the two things buyers valued most in Baltic birch.

How to check that a birch panel is not of Russian origin
To check that a birch panel is not of Russian origin, ask for the species and country of harvest of every veneer and the documents that prove it, not only the country of the mill. Birch face veneer travels: a panel pressed in one country can carry veneer cut in another.
- Ask for the veneer origin in writing. Face, back and core, with species and country of harvest.
- Ask for the supporting records. Veneer purchase invoices, the supplier’s own origin declarations and, for the EU, geolocation of the harvest plots.
- Check the route. Birch plywood consigned from Kazakhstan or Türkiye into the EU pays the extended duty unless the exporter holds an exemption.
- Check certification claims. Russian FSC and PEFC certificates have been suspended since 2022.
- Keep the file. The EU importer files the EUDR due diligence statement; the US importer files the Lacey Act declaration.
Minh Thanh Plywood supplies the EUDR compliance dossier, with origin records and geolocation files, with orders, and supplies face and core species and harvest origin for the Lacey Act declaration. Read our EUDR traceability page.

What the shortage means for your next birch order
For your next birch order, the shortage means writing the use, the visible surfaces and the documents into the request, so the supplier can offer all-birch only where it is needed and a birch-faced panel everywhere else. That usually lowers the cost per cubic metre and shortens the lead time.
A specification line that works for most furniture and cabinet buyers:
Birch-faced plywood, 18 mm, 1220 × 2440 mm, D/D birch face and back, stitched Styrax core, UF glue at E0 emission, sanded ±0.2–0.3 mm, moisture 8–12% at dispatch, EUDR dossier with the order.
At Minh Thanh Plywood the MOQ is one 40HC with mixed specifications by agreement, and production takes 15–45 days after the 30% deposit. At 18 mm, a 40HC carries 990 sheets on a Styrax core, about 53 m³, within a 28,000 kg planning payload. Indicative starting prices in October 2026 are US$350/m³ for furniture and interior plywood, FOB Hai Phong; face, core, glue, thickness, size, quantity and delivery term set the final price.
What Minh Thanh Plywood offers birch buyers
Minh Thanh Plywood is a manufacturer in Ha Hoa, Phu Tho, Vietnam, with 50,000+ m³ of annual capacity, built for top-grade furniture and interior plywood with Europe as its main market. We make birch-faced plywood on our own stitched, double-pressed cores for buyers who used Baltic birch for faces, cabinets and furniture parts.
- Build: white Styrax or eucalyptus cores as standard; acacia and pine on order; core layers stitched both ways; furniture panels pressed twice.
- Faces: birch in grades D+, D and E, with face and back pairs matched to the approved sample; both faces UV-ready.
- Glue and emission: UF at E0 for furniture panels; CARB P2 / TSCA Title VI certified (ICTT mill no. 23024).
- Sizes and thickness: 1220 × 2440 and 1250 × 2500 mm, custom sizes, cut-to-size; 3–40 mm.
- Documents: EUDR dossier, CARB P2 / TSCA certificate and test reports on order; FSC® available.
- Terms: FOB Hai Phong, CFR or CIF; 30% deposit and 70% against the scanned B/L, or an irrevocable L/C at sight; free samples.
See the birch plywood page for the full specification, and our Baltic birch plywood suppliers guide for how to compare offers.
What to send for a birch-faced plywood quote
Send the use, the visible surfaces and the documents you need, and we reply within hours with a quote and a sample offer.
- Application: cabinets, furniture, fixtures, CNC parts; which faces and edges are seen.
- Core: Styrax or eucalyptus; acacia or pine on order.
- Face and back: birch grade pair, such as D+/D or D/D, or a sample to match.
- Glue and emission: UF at E0, or melamine-fortified or phenolic WBP.
- Size and thickness: 1220 × 2440 or 1250 × 2500 mm, thickness and tolerance, cut-to-size if needed.
- Destination and documents: port, CFR or CIF, EUDR dossier, TSCA label or other papers.
Write to contact@minhthanhplywood.com or WhatsApp +84 988 586 601 (Lisa), Monday–Friday, 08:00–17:00 Vietnam time.
Buyer questions, answered
Is there still a Baltic birch plywood shortage?
Supply of all-birch plywood outside Russia is smaller than before 2022, so prices stay higher and some thicknesses have long lead times. Birch-faced plywood on other cores and European all-birch fill most orders, so the shortage is now mainly one of price and choice.
Why is Baltic birch plywood so expensive now?
Russia had been the main source of all-birch plywood, and from 2022 the EU banned Russian wood imports while the US raised tariffs to 40–50%. The remaining all-birch supply from Finland, Latvia and other countries serves the same demand at higher cost.
Can you still buy Russian birch plywood in the EU?
No. Russian wood products, including plywood, have been banned from EU import since 2022 under Council Regulation (EU) 2022/576. Birch plywood consigned from Kazakhstan and Türkiye also carries the EU anti-dumping duty on Russian birch since May 2024.
Is Russian plywood banned in the US?
Russian plywood is not banned outright in the US, but normal trade relations with Russia were suspended from 9 April 2022, raising tariffs on Russian hardwood plywood from 0–8% to 40–50%. US imports of Russian hardwood plywood fell 70% in 2023.
What replaced Russian birch plywood?
European all-birch from Finland, Latvia and other Baltic and Nordic mills; birch-faced plywood with poplar, eucalyptus or Styrax cores from China and Vietnam; and other faces such as poplar, pine and EV for painted or laminated work.
Is Chinese birch plywood made with Russian birch?
Some may be: China increased its imports of Russian hardwood plywood after 2022, and the EU has warned of Russian plywood relabelled through third countries. Ask any supplier for the species and country of harvest of every veneer, with documents.
Is birch-faced plywood as good as Baltic birch?
For faces, painted work, cabinets and furniture parts, a birch-faced panel with a stitched, calibrated core does the same job. For exposed edges and high screw-holding in thin parts, all-birch is still the reference.
What grades does Vietnamese birch-faced plywood use?
Birch faces are graded D+, D and E in Vietnam, quoted as face/back pairs such as D+/D or D/E. Individually, D+ is about B, D about BB and E about CP/C on the European birch ladder.
How much does Baltic birch plywood cost in 2026?
Baltic mills quoted 9 mm A/B birch plywood at about €620/m³ ex-mill in September 2025, and a 3/4 in 4 × 8 ft BB/BB sheet listed at $98.90 at US retail in July 2026. Minh Thanh Plywood quotes birch-faced plywood from US$350/m³ FOB Hai Phong.
How long is the lead time for Baltic birch plywood?
Lead times from Baltic mills are typically 8–12 weeks. Minh Thanh Plywood produces birch-faced plywood in 15–45 days after the 30% deposit.
Does EUDR apply to birch plywood?
Yes. Plywood is a covered wood product under the EU Deforestation Regulation, so the importer needs origin records and geolocation for the wood. Minh Thanh Plywood supplies the EUDR compliance dossier with orders.
What is the EU anti-dumping duty on Russian birch plywood?
Commission Implementing Regulation (EU) 2021/1930 of 8 November 2021 set a definitive anti-dumping duty of 15.80% on birch plywood from Russia for all other companies. Regulation (EU) 2024/1287 extended it to birch plywood consigned from Kazakhstan and Türkiye.