CARB P2 / TSCA VI certifiedISO 9001:2015E0 tested every 3 monthsEUDR geodataPPWR testedCertificates and test resultscontact@minhthanhplywood.comWhatsApp +84 988 586 601

Plywood blog

Plywood blog: choose, specify and compare panels – Page 7

Plywood blog: practical buying guides

586 guides

Cover of “Plywood Density: kg/m³ by Core Species”: 500 kg/m³ Styrax; 580 kg/m³ Acacia; 650–750 kg/m³ Eucalyptus; 990 / 880 / 795 sheets per 40HCSpecifications16 min read

Plywood Density: kg/m³ by Core Species

Plywood density in kg/m³, g/cm³ and lb/ft³ by core species: Styrax 500, Acacia 580, Eucalyptus 650–750, birch and MDF, with sheet weights and container loads.
Cover of “Plywood Door Skin: Sizes, Faces and Price”: 915 × 2135 mm, 3 × 7 ft; 3–4 mm always 5-ply; ±0.2–0.3 mm sanded; 170 skins of 3 mm per m³Applications13 min read

Plywood Door Skin: Sizes, Faces and Price

Plywood door skin guide: 3 × 7 ft and 4 × 8 ft sizes, 3–4 mm 5-ply construction, faces, flatness and tolerance, and the drivers behind door skin plywood price.
Cover of “How to Identify Good Quality Plywood: 8 Checks”: 8 checks; ±0.2–0.3 mm sanded panels; ±2 mm length and width; 8–12 % moistureSpecifications17 min read

How to Identify Good Quality Plywood: 8 Checks

How to identify good quality plywood in 8 steps: thickness, plies and core gaps, glue bond, moisture and face defects such as scant face and mineral streak.
Cover of “Veneer Finish and Plywood Colour: Face Veneer Guide”: 0.2–0.5 mm face veneer; 0.3 mm usual for European furniture; 10+ face veneers; ±0.2 mm sandedPlywood types13 min read

Veneer Finish and Plywood Colour: Face Guide

Plywood face veneers by colour, grain and veneer finish: birch, poplar, EV, okoume, pine, bintangor and gurjan, dark faces, grades and a colour chart.
Cover of “Plywood Supplier: Factory or Trader?”: 5 checks; 4 supplier types; 7 warning signs; 1621 industry code, plywoodImporting15 min read

Plywood Supplier: Factory or Trader?

Plywood supplier, factory or trader? Check a Vietnamese company on the national registry and tax portal step by step, read the signs, and know what brokers do.
Cover of “Plywood Flooring: Which Plywood for Which Floor”: 18 mm at 400 mm joists; 22 mm at 600 mm; 990 sheets of 18 mm per 40HC; 8–12% moisture at dispatchApplications14 min read

Plywood Flooring: Which Panel Suits Each Floor

Plywood flooring guide: which panel to use as a subfloor, underlay or finished floor, thickness by joist spacing, glue bond, wear finishes and plywood vs OSB.
Cover of “Bed Plywood: Thickness, Grade and Base Spec”: 18 mm on supports up to 650 mm; 3 sheets for a king platform bed; 26.8 vs 34.8 kg Styrax vs Eucalyptus sheet; 990 sheets of 18 mm per 40HCApplications13 min read

Bed Plywood: Thickness, Grade and Base Spec

Bed plywood: base thickness by support spacing, frame panels, plywood vs slats, ventilation, sheets per king bed and what bed makers order.
Cover of “Plywood for Cabinet Boxes and Carcasses”: 18 / 12 / 3–6 mm sides / drawers / backs; ±0.2–0.3 mm tolerance; 990 sheets per 40HC at 18 mm; US$350/m³ from (Oct 2026)Applications14 min read

Plywood for Cabinet Boxes and Carcasses

Plywood for cabinet boxes part by part: thickness, face grades, core, prefinished options, screw and dowel holding, drawer box plywood and container plans.
Cover of “Plywood for Cabinet Doors: Buyer Guide”: 18 mm slab doors; 6 mm shaker panels; 8–12 % moisture at dispatch; US$350/m³ from (Oct 2026)Applications14 min read

Plywood for Cabinet Doors: Buyer Guide

Plywood for cabinet doors that stays flat: thickness, balanced build, face grade, veneer vs laminate vs paint, plywood vs MDF, edges and a flatness check.
Cover of “Plywood Desk Tops: Thickness, Finish, Spec”: 750 mm span at 18 mm; 1,500 mm span at 36 mm; 0.8 vs 2.25 creep factor, plywood vs MDF; ±0.2 mm toleranceApplications13 min read

Plywood Desk Tops: Thickness, Finish, Spec

Plywood desk and table tops: thickness by span between legs, plywood vs MDF, HPL and veneer finishes, edges and the office panel spec.
Cover of “Mold Resistant Plywood for Hot, Humid Climates”: 8–12 % moisture at dispatch; 20 % decay threshold, about; 30 % fibre saturation, about; 130–145 °C WBP pressingApplications14 min read

Mold Resistant Plywood for Hot, Humid Climates

Mold resistant plywood for tropical and coastal markets: glue, core, moisture content at shipment, coatings, container sweat and what to write on the order.
Cover of “Plywood Shelves: Thickness, Span and Grade”: 650 mm 18 mm span under 30 kg/m; 12 to 25 mm span table; 0.8 vs 2.25 creep, plywood vs MDF; 12 shelves of 300 × 800 mm per sheetApplications14 min read

Plywood Shelves: Thickness, Span and Grade

Plywood shelves by thickness and load: a sag-checked span table, plywood vs MDF, and the best plywood for pantry, garage and floating shelves.
Cover of “Plywood for Shop Walls, Counters and Displays”: 18 mm counters and gondolas; ±0.2 mm calibrated; D-s2,d0 untreated plywood; 0.014-0.032 ppm, chamber resultsApplications14 min read

Plywood for Shop Walls, Counters and Displays

Plywood for shop walls, counters, display boards and exhibition stands: spec by element, birch vs poplar vs EV, fire class, OSB vs plywood, roll-out supply.
Cover of “Plywood Synonyms, Names and Glossary A to Z”: 11–13 plies at 18 mm; 1220 × 2440 mm = 4x8; 5-ply always at 3–5 mmPlywood types14 min read

Plywood Synonyms, Names and Glossary A to Z

Plywood synonyms and other names: ply, multiplex, contrachapado, contreplaqué, Sperrholz, sklejka, kontrplak. Plus an A to Z glossary and trade abbreviations.
Cover of “Construction Plywood Grades and Stamps Decoded”: 32/16 span rating; 11.11–12.70 mm 15/32 CAT; ±0.8 mm unsanded tolerance; 18% max moisture at shipmentSpecifications14 min read

Construction Plywood Grades and Stamps Decoded

Construction plywood grades decoded: each line of a PS 1 grade stamp, span ratings, CAT rated sheathing, Exposure 1 vs Exterior and 15/32 Structural I.
Cover of “Plywood Grades Explained: Chart, A–D, B/BB”: 6 US veneer grades, N to D; 25.4 mm B knots, up to; D+/D ≈ B/BB Vietnamese faces; 0.014–0.032 ppm, chamber resultsSpecifications22 min read

Plywood Grades: Chart, A–D, B/BB

Plywood grades explained in one grading chart: US A–D and N, ACX and CDX, hardwood AA–E, Baltic B/BB/CP, Asian AA–CC, bond and emission grades.
Cover of “What Documents Are Needed to Import Plywood?”: 4 core documents; 70% balance against B/L; 15–45 days production after depositImporting15 min read

What Documents Are Needed to Import Plywood?

What documents are needed to import plywood from Vietnam: invoice, packing list, B/L, certificate of origin, ISPM 15, test reports, EUDR, TSCA and Lacey files.

Work with Minh Thành Plywood

Have a plywood question? Send the specification.

Tell us the application and destination port. We reply within hours with the panel construction, a dated price and the documents for your market.

Get a quote

Contact us

Get a quote