CARB P2 / TSCA VI certifiedISO 9001:2015E0 tested every 3 monthsEUDR geodataPPWR testedCertificates and test resultscontact@minhthanhplywood.comWhatsApp +84 988 586 601

Plywood blog

Plywood blog: choose, specify and compare panels – Page 4

Plywood blog: practical buying guides

586 guides

Cover of “Hex Plywood: What It Is and How to Specify It”: 220 g/m² hex film; 120–135 g/m² formwork film; 12–21 mm thickness; 43 / 47 m³ per 40HCPlywood types13 min read

Hex Plywood: What It Is and How to Specify It

Hex plywood explained: one spec behind hexa, hexaboard and hexply names, film weight, core, glue, trailer floor thickness and the steps to order it.
Cover of “High Quality Plywood: What It Is by Use”: ±0.2 mm sanded; 0.014–0.032 ppm, vs 0.05 ppm limit; 8–12 % moisture; 8 point checkSpecifications14 min read

High Quality Plywood: What It Is by Use

High quality plywood by use: cabinets, furniture, formwork, marine and packing. What quality means in core, glue, face and tolerance, plus a buyer checklist.
Cover of “How Is Film Faced Plywood Made? Steps, Film and Reuses”: 120–135 g/m² film; 220 g/m² anti-slip; 12–15 / 25 pours, melamine / phenolic; ±0.5 mm toleranceManufacturing15 min read

How Is Film Faced Plywood Made? Steps and Reuses

How film-faced plywood is made in 10 steps: core veneer, lay-up, glue, double pressing, calibration, phenolic film in g/m², edge sealing and what sets reuses.
Cover of “LVL Production: How LVL Beams Are Made”: 10 steps; 3 mm veneers, about; 8–12% moisture; 580 / 650–750 kg/m³ Acacia / EucalyptusManufacturing14 min read

LVL Production: How Beams Are Made

LVL production explained: veneer peeling, drying, grading, glue and parallel lay-up, pressing, sawing and checks, LVL vs plywood lay-up, and what to ask a mill.
Cover of “How to Bend Plywood: 5 Methods, Radius, Kerfs”: 5 bending methods; 0.6 m min. dry radius, 1/4 in; 63 mm kerf spacing, 18 mm at 300 mm; 8–12% moisture at dispatchApplications14 min read

How to Bend Plywood: 5 Methods, Radius, Kerfs

How to bend plywood: flexible ply, kerfing, steam, bent lamination and vacuum forming, minimum radius by thickness, kerf spacing formula and furniture tips.
Cover of “How to Build Concrete Formwork for Walls”: 25 kN/m² per metre of fluid concrete; 38.4 kN/m² at 1.5 m/h and 20 °C; 27 kN per tie, 600 × 900 mm grid; 12–15 / 25 uses, melamine / phenolicApplications18 min read

How to Build Concrete Formwork for Walls

How to build concrete formwork for walls with plywood: 10 steps, pressure by pour rate, tie spacing, bracing, one-sided forms and plywood per pour count.
Cover of “How to Check Quality of Plywood: 10 Tests and What Fails”: 10 tests; 5 caliper points per sheet; ±0.2–0.3 mm sanded furniture panels; 8–12 % moistureSpecifications15 min read

How to Check Quality of Plywood: 10 Tests

How to check quality of plywood in ten tests: edges, voids, weight, flatness, thickness, moisture, glue, face, boil test and labels, and what fails.
Cover of “How Do I Verify Plywood Quality on Arrival?”: 3 × 5 packs × sheets per spec; ±0.2–0.3 mm furniture, ±0.5 commercial; 8–12% moisture; 6 h / 12 h boil test, UF / MRImporting14 min read

How Do I Verify Plywood Quality on Arrival?

How do I verify plywood quality on arrival: seal and pack count, caliper and moisture readings, face grades, edges, a boil test and a photo record.
Cover of “How to Find a Reliable Plywood Supplier”: 6 checks; 14+ of 16 points to trial; 30% / 70% deposit / against B/L; 0.014–0.032 ppm, chamber resultsImporting19 min read

How to Find a Reliable Plywood Supplier

How to find a reliable plywood supplier in Vietnam: where to search, a scored checklist for factory proof, certificates, samples, payment and loading photos.
Cover of “How to Compare Plywood Quotations”: 11–13 vs 9 plies at 18 mm; 5.6% less wood at 17 mm; 26.8 vs 34.8 kg per sheet by core; 990 vs 795 sheets per 40HCImporting30 min read

How to Compare Plywood Quotations

How to compare plywood quotations line by line: core, plies, glue, real thickness, face, packing and terms, with a comparison sheet and a proforma checklist.
Cover of “LVL Beam Hanger and Installation Guide”: 525 plf 3 rows of 16d nails at 12 in.; 755 plf ½ in. bolts; 1.5 in. max hole, or depth/10; 8–12% moisture at dispatchApplications16 min read

LVL Beam Hanger and Installation Guide

LVL beam hanger and install guide: bearing, nailing pattern for 2-, 3- and 4-ply beams, double hangers, drilling limits and outdoor use, from maker notes.
Cover of “Plywood Patch and Repair: Holes, Rot, Stains”: 7 damage types; 6 steps per patch; 20 % moisture: below it, no decay; 8–12 % moisture at dispatchApplications12 min read

Plywood Patch and Repair: Holes, Rot, Stains

Plywood patch and repair guide: fill holes, re-glue delamination, fix torn veneer, remove water stains, cut out rot, and know when to replace the sheet.
Cover of “Plywood Sealer: How to Seal Plywood Step by Step”: 8–12 % moisture at dispatch; 3 bond classes; 10 steps; 5 checksApplications15 min read

Plywood Sealer: How to Seal in Steps

Plywood sealer guide: which sealer suits each exposure, why the glue class matters more than the coating, edge-first sealing steps, drying times and checks.
Cover of “Veneering Plywood: Glue, Press and Steps”: 9 steps; 0.2–0.5 mm face veneer; 110–145 °C press, MR to WBP; ±0.2–0.3 mm sandedManufacturing15 min read

Veneering Plywood: Glue, Press and Steps

Veneering plywood step by step: substrate prep, veneer glue (PVA, UF, contact cement), vacuum bag or press, balancing both faces.
Cover of “Waterproofing for Plywood: Step by Step”: Class 1/2/3 EN 314-2 bonds; 8 steps; 1-2 / 3-5 years oil / paint; 8–12 % moisture at dispatchApplications14 min read

Waterproofing Plywood in Steps

Waterproofing for plywood in 8 steps: choose a WBP panel, seal the edges, then pick oil, water-based sealer, epoxy, paint, liquid rubber or bitumen by use.
Cover of “Formica Plywood: HPL Plywood Buyer Guide”: < 2 mm HPL thickness (EN 438-3); 5 MPa and 120 °C, at least; ±0.2 mm calibrated plywood; 990 sheets of 18 mm per 40HCPlywood types13 min read

Formica Plywood: HPL Buyer Guide

Formica plywood is HPL bonded to plywood: HPL vs melamine, the substrate it needs, worktops, shopfitting, laminated birch, gluing steps and order lines.
Cover of “China Plywood Suppliers: How to Import Plywood from China”: 86.8% EU anti-dumping, up to; 6% vs 0% UK, China vs Vietnam; 3 clusters; 8 point supplier checklistImporting16 min read

China Plywood Suppliers: How to Import

China plywood suppliers: where Chinese plywood is made, EU, US and UK duties, origin and transshipment risk, a supplier checklist.
Cover of “Industrial Wood and Industrial Plywood: Uses and Specs”: 10 industrial uses; 18–30 mm trailer floors; 9–12 mm crate sides; ±0.5 mm commercial toleranceApplications16 min read

Industrial Wood and Plywood: Uses and Specs

What industrial wood is, and the industrial plywood each use needs: vehicle floors, crates, decks, cable drums, jigs and signs, with glue, face and thickness.

Work with Minh Thành Plywood

Have a plywood question? Send the specification.

Tell us the application and destination port. We reply within hours with the panel construction, a dated price and the documents for your market.

Get a quote

Contact us

Get a quote