CARB P2 / TSCA VI certifiedISO 9001:2015E0 tested every 3 monthsEUDR geodataPPWR testedCertificates and test resultscontact@minhthanhplywood.comWhatsApp +84 988 586 601

Plywood applications: furniture buying guides

Cover of “Plywood Patch and Repair: Holes, Rot, Stains”: 7 damage types; 6 steps per patch; 20 % moisture: below it, no decay; 8–12 % moisture at dispatchApplications12 min read

Plywood Patch and Repair: Holes, Rot, Stains

Plywood patch and repair guide: fill holes, re-glue delamination, fix torn veneer, remove water stains, cut out rot, and know when to replace the sheet.
Cover of “Plywood Sealer: How to Seal Plywood Step by Step”: 8–12 % moisture at dispatch; 3 bond classes; 10 steps; 5 checksApplications15 min read

Plywood Sealer: How to Seal in Steps

Plywood sealer guide: which sealer suits each exposure, why the glue class matters more than the coating, edge-first sealing steps, drying times and checks.
Cover of “Waterproofing for Plywood: Step by Step”: Class 1/2/3 EN 314-2 bonds; 8 steps; 1-2 / 3-5 years oil / paint; 8–12 % moisture at dispatchApplications14 min read

Waterproofing Plywood in Steps

Waterproofing for plywood in 8 steps: choose a WBP panel, seal the edges, then pick oil, water-based sealer, epoxy, paint, liquid rubber or bitumen by use.
Cover of “Formica Plywood: HPL Plywood Buyer Guide”: < 2 mm HPL thickness (EN 438-3); 5 MPa and 120 °C, at least; ±0.2 mm calibrated plywood; 990 sheets of 18 mm per 40HCApplications13 min read

Formica Plywood: HPL Buyer Guide

Formica plywood is HPL bonded to plywood: HPL vs melamine, the substrate it needs, worktops, shopfitting, laminated birch, gluing steps and order lines.
Cover of “Industrial Wood and Industrial Plywood: Uses and Specs”: 10 industrial uses; 18–30 mm trailer floors; 9–12 mm crate sides; ±0.5 mm commercial toleranceApplications16 min read

Industrial Wood and Plywood: Uses and Specs

What industrial wood is, and the industrial plywood each use needs: vehicle floors, crates, decks, cable drums, jigs and signs, with glue, face and thickness.
Cover of “Insulated Plywood: Types, R-Values and Uses”: 0.14 m²K/W 18 mm plywood; 0.022 W/mK PIR; 2.27 m²K/W 50 mm PIR; ±0.5 mm commercial toleranceApplications13 min read

Insulated Plywood: Types, R-Values and Uses

Insulated plywood explained: PIR-bonded boards, SIPs, foam sandwich and foil sheathing, R-values against plain plywood, uses in roofs, floors and vans.
Cover of “Iroko Wood: Properties, Iroko vs Teak, Uses and Legality”: 660 kg/m³ density; 1,190 lbf Janka, vs teak 1,070; 8.8% shrinkage; Not CITES IUCN near threatenedApplications13 min read

Iroko Wood: Properties, Colour and Teak

Iroko wood explained: density, hardness and durability, iroko vs teak by use, worktops and cladding, working tips, dust safety and EUDR rules for importers.
Cover of “LVL Beams: Uses, Sizes and LVL vs Timber”: 1-3/4 in standard thickness; 9-1/4 to 24 in depths; 580 / 650–750 kg/m³ Acacia / Eucalyptus; 8–12% moistureApplications13 min read

LVL Beams: Uses, Sizes and Timber

LVL beams explained: what they are, what they are used for, standard sizes, LVL vs sawn lumber and glulam, span and grade rules.
Cover of “LVL Runners and Pallet LVL: Packing LVL Explained”: 8-12% moisture at dispatch; 580 kg/m3 Acacia, about; 2 1200 mm runners per 2440 mm billet; 43.1 m3 Acacia LVL per 26,000 kgApplications13 min read

LVL Runners and Pallet Blocks: Packing Guide

LVL runners and packing LVL explained: what pallet LVL is, LVL vs solid timber vs chip block, ISPM 15, runner and block sizes by pallet type, and what to order.
Cover of “LVL Post Sizes, Columns and How to Specify”: 3-1/2 to 7 in square posts; 90 to 180 mm square posts; 11.5 kg 90 × 90 × 2,440 mm Acacia; 43.1 m³ Acacia per 26 t bookingApplications12 min read

LVL Post Sizes, Columns and How to Specify

LVL post guide: standard sizes in inches and mm, solid vs built-up LVL columns, load path basics, exposed posts and treatment, and what to put on the order.
Cover of “LVL Sizes: Standard LVL Dimensions in mm and Inches”: 35–75 mm thickness: 35, 45, 63, 75; 90-450 mm depths; 5.2 kg per metre at 200 × 45; 48 m³ Acacia per 40HCApplications13 min read

LVL Sizes: Standard Dimensions in mm and Inches

LVL sizes explained: standard LVL dimensions in Australia and North America, beam depths, thickness and lengths, a mm and inch chart, and how to order LVL.
Cover of “Parallel Strand Lumber vs LVL vs LSL Compared”: 3 mm LVL veneers; 2.4 m PSL strips, up to; 300 mm LSL strands, up to; 2.0E LVL and PSL, aboutApplications14 min read

Parallel Strand Lumber vs LVL vs LSL Compared

LVL vs PSL vs LSL compared: parallel strand lumber, laminated strand and laminated veneer lumber by raw material, lay-up, stiffness, sizes, uses and cost.
Cover of “Mahogany Plywood: Genuine, African, Sapele”: Appendix II CITES, Swietenia; 23 Feb 2023 Khaya in CITES; 1,360 lbf Sapele Janka; US$350/m³ fromApplications14 min read

Mahogany Plywood: Genuine, African, Sapele

Mahogany plywood explained: genuine, African (khaya), sapele, meranti and EV faces, CITES rules, marine vs interior, grades, cores and how to order.
Cover of “Mango Wood: Properties, Furniture Use, Pros and Cons”: 1,070 lbf Janka, about; 675 kg/m³ density, about; 8–12 % moisture; 1,155 / 1,360 lbf teak / oakApplications13 min read

Mango Wood: Furniture Use, Cons

Mango wood for furniture buyers: hardness and density, orchard origin, cracking, moisture and insects, mango vs oak and acacia.
Cover of “MDO vs MDF: Difference, Uses and Which to Buy”: 26.8 kg 18 mm Styrax sheet; 0.05 vs 0.11 ppm, plywood vs MDF; 0.014–0.032 ppm, our chamber results; 27% / 34% MDO overlay resinApplications16 min read

MDO vs MDF: Difference, Uses and Which to Buy

MDO vs MDF compared: overlay plywood versus fibreboard on moisture, screw holding, weight, paint, routing, emissions and cost, with a verdict for each use.
Cover of “Melamine Plywood: Faced Panel Specification”: ±0.2 mm calibrated thickness; E0 UF glue emission; 0.014–0.032 ppm, vs 0.05 ppm limit; 990 sheets of 18 mm per 40HCApplications15 min read

Melamine Plywood: Faced Panel Specification

Melamine plywood specified: décor paper, finishes, substrate core, calibration to ±0.2 mm, UF glue at E0 emission, edge chipping, white and black panels.
Cover of “Melamine Kitchen Cabinets vs Plywood Compared”: 18 mm carcass; 26.8 kg per Styrax sheet; 0.09 ppm particleboard limit; 0.05 ppm plywood limitApplications15 min read

Melamine Kitchen Cabinets vs Plywood Compared

Melamine kitchen cabinets vs plywood: screw holding, swelling, weight, emissions and cost per cabinet compared, with a decision table for every cabinet part.
Cover of “Okoumé Wood vs Mahogany, Meranti and Birch”: 430 vs 675 kg/m³, okoume vs meranti; 400 lbf Janka, vs 800–850; 0.2–0.5 mm face veneer; 990 sheets per 40HCApplications12 min read

Okoumé Wood vs Mahogany, Meranti and Birch

Okoumé (Aucoumea klaineana) vs mahogany, meranti and birch: density, hardness, strength, durability, okoume plywood properties, uses and a verdict by job.

Work with Minh Thành Plywood

Have a plywood question? Send the specification.

Tell us the application and destination port. We reply within hours with the panel construction, a dated price and the documents for your market.

Get a quote

Contact us

Get a quote